International Interzone 505

EGA885

We no longer stock this product, but can recommend International Interzone 954GF as a great alternative.

International Interzone 505 is a high solids, low VOC, high build epoxy primer/intermediate or finish coat, reinforced with chemically resistant high aspect ratio glass flake for enhanced durability and corrosion resistance to provide excellent long term, anti-corrosive and anti-abrasion protection in both new construction and maintenance situations.

Quantity

Description

We no longer stock this product, but can recommend International Interzone 954GF as a great alternative.



International Interzone 505 is a high solids, low VOC, high build epoxy primer/intermediate or finish coat, reinforced with chemically resistant high aspect ratio glass flake for enhanced durability and corrosion resistance.

International Interzone 505 is a 90% solids epoxy enhanced with chemically resistant high aspect ratio glass flake, which provides long term, anticorrosive and antiabrasion protection in new construction and maintenance situations.

International Interzone 505 withstands the abrasive and corrosive effects in splash and tidal zones, is resilient to chemical splash and spillages encountered in industrial environments and resists damage in immersed conditions, when used in a suitable system.

International Interzone 505 is enforced with high aspect ratio glass flake but retains a smooth surface finish compared to other glass flake epoxies. Compatible with a range of finishes, Interzone® 505 is an ideal choice as a primer or intermediate in corrosive environments.

International Interzone 505 holds Norsok M-501 Rev 5 System 7 approvals for submerged (subsea) areas. Other approvals held include: ACQPA (France), BBA 123 (Bridges) (UK) and UK Network Rail (UK).

Intended Uses

  • International Interzone 505 is for the protection of steelwork in all corrosive environments including splashzone areas on offshore structures, underdeck, decks and above water areas, pilings, pulp and paper mills, bridges and chemical plants.
  • To provide excellent long term, anti-corrosive and anti-abrasion protection in both new construction and maintenance situations.
  • International Interzone 505 can be used as part of a non-slip deck system in conjunction with appropriate aggregate*.

Features & Benefits

  • Designed for the protection of steelwork in severe corrosive environments such as splashzones, pilings and chemical plants
  • Reinforced with glass flake for enhanced durability and corrosion resistance
  • Smooth surface finish when compared to other glass flake epoxy coatings
  • High film build, high solids, low VOC
  • Significantly improved overcoating intervals and curing speed for increased productivity
  • Ease of application
  • Compatible with sacrificial and impressed current cathodic protection systems

International Interzone 505 has the following specification approvals:

  • Complies with UK Department of Transport Item No. 123

Colours

  • 'Off White' is comparable to BS 4800 08 B 15
  • 'Yellow' is comparable to RAL 1004
  • 'Grey' is comparable to RAL 7036

*International Interzone 505 can be used as a non-skid deck system by modification with addition of GMA132 (crushed flint) aggregate. Application should then be to a suitably primed surface. Typical thicknesses will be between 500-1,000 microns (20-40 mils). Preferred application is by a suitable large tip hopper gun (e.g. Sagola 429 or Air texture gun fitted with a 5-10 mm nozzle). Trowel or roller can be used for small areas. Alternatively, a broadcast method of application can be used.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
EGA885

Data sheet

Application
Brush, Roller, Spray
Touch Dry
3 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

808 Etch Primer

We no longer stock this product, but can recommend Britannia One Pack Etch Primer as a great alternative.

In stock

SikaScreed K Rapid

Unfortunetely we no longer stock this product. Please contact our sales team on 0113 2455450 if you require help, or check out the rest of the Sika range.

In stock

RSL MP Primer

We no longer stock this product, but can recommend RSL Resuprime MVT as a great alternative.

In stock

Jotun Butinox 2

Jotun Butinox 2 has been discontinued by the manufacturer. We now offer Jotun Demidekk Ultimate as an alternative.

In stock