We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. See our Fireproof Paint for Wood page for more fire paints and coatings.
Product customisation
Don't forget to save your customization to be able to add to cart
Representations shown below; represented as solid colours in the colour picker further above.
Thermoguard Thermoproof Interior Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Interior Fluid where protection from wear, damp & UV resistance is required. Thermoguard Thermoproof Interior Sealer is available in clear or woodstain colours (White Low, White Medium and Grey are temporarily unavailable until further notice).
Thermoguard Thermoproof Interior Sealer doubles up as Thermoguard Fire Varnish Overcoat (Interior). The product is labelled on the containers as 'Fire Varnish Overcoat & Thermoproof Sealer' and is available in 20m² and 80m² pack sizes.
Thermoguard Thermoproof Interior Fluid is a fire protection fluid for porous internal wood. In a fire, Thermoproof Fluid reacts with the woods cells to create a flame & heat resistant barrier.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
TTIS
Data sheet
Application
Brush, Roller, Spray
Coverage
Supplied in pre-measured packs to apply 1 coat to 20m² or 80m²
Thermoguard Thermoproof Interior Fluid is a clear, colourless, penetrating Fire Protection with an optional functional Thermoguard Thermoproof Interior Sealer for wear, damp & UV resistance available in clear or woodstain colours.
Please Note: Timber must be a minimum of 9mm thick for the treatment to be effective
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.
Provides an economical way of making sure you will have what you need
Ideal for interior and exterior paint projects
Click to jump down to...
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.