• Rust-Oleum 9400 Rust-O-Thane SL

Rust-Oleum 9400 Rust-O-Thane SL

We no longer stock this product; without knowing the use of the floor, the closest alternative product we can offer is Sikafloor 3240.

Quantity

Description

We no longer stock this product; without knowing the use of the floor, the closest alternative product we can offer is Sikafloor 3240.

Rust-Oleum 9400 Rust-O-Thane SL is a high build, self-levelling, solvent-free polyurethane for interior industrial, concrete and asphalt floors. Typical uses are interior process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic and where a degree of flexing of the floor is expected.

This product offers excellent protection against high humidity and moisture, frequent spillage of chemicals, heavy abrasion, impact, and heavy pedestrian and vehicular traffic.

Features & Benefits

  • Good chemical resistance
  • Seamless smooth industrial finish
  • Very easy to clean and sterilise
  • Low maintenance costs
  • Flexible coating
  • Can be used on asphalt and concrete
  • Withstands heavy traffic
  • Impermeable for liquids
  • Very durable
  • Not flammable

Technical Data 

  • Density: 1,5
  • Gloss Level: Gloss
  • Solids content in volume: 100 %
  • Solids Content in weight: 100 %
  • Heat Resistance: 60°C (sustained dry heat)
  • Tensile Strength: 10 MN/m²
  • Flexural Strength: 15 MN/m²
  • Mixing Ratio: Base : Activator = 4.9 : 1 (weight) = 3.9 : 1 (Volume)

Drying Times At 20°C/RH 50%

  • Touch dry: 6 hours
  • Dry to handle: 8 hours
  • Dry to recoat: 24 hours
  • Fully cured: 5 - 7 days
  • Pot Life: 45 minutes at 20°C

Surface Preparation
New concrete should cure and dry for at least 30 days prior to the application of the product. Remove oil, grease and all other surface contaminations by alkaline or high pressure (steam) cleaning. Concrete curing compounds should be removed completely. All laitance, loose or unsound concrete should be removed by vacuum-blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Large surfaces should preferably be prepared by abrasive blasting (vacuum blasting). If this is impossible scrabbling or roughening of the surface is necessary - Profile maximum 0.5mm.

Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar or Rust-Oleum 5412 Epoxy Filler. Previously coated surfaces must be in sound condition and a test-patch is recommended to check compatibility. The surface should be clean, dry and have a strength of minimum of 25 N/mm² before the coating can be applied.

Directions for Use
Add all of Hardener B to Base A. Mix with slow speed drill and helical spinner, taking care not to entrain air. It is advisable to pour mixed contents into a second container and re-mix to ensure the product is homogenous and no soft spots are seen in the applied coating.

  • 4.9 parts of Base A are mixed with 1 part of Hardener B, by weight.
  • 3.9 parts of Base A are mixed with 1 part of Hardener B, by volume.

The product is supplied in full units as A+B. Do not split the compounds/components as this may jeopardise the end result.

Pot-life: 45 minutes at 20°C (at higher temperatures the application time is shorter).

Application
Rust-Oleum 9400 Rust-O-Thane SL is applied with a rake and/or trowel and de-aeration roller. Use Rust-Oleum 5401 Epoxy Impregnation Primer or Rust-Oleum 5421 Epoxy Floor Primer Rapid on porous mineral substrates prior to application. Use Rust-Oleum B95SL Flexible Self Levelling Epoxy – diluted with 20% Rust-Oleum Thinner 641 on asphalt floors. On dense surfaces first apply a coat Rust-Oleum 3333 Super Adhesion Primer or Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid.

Clean-up: Use Rust-Oleum Thinner 160.

Application Conditions
The recommended substrate and environment temperature is 15 - 25°C, but no less than 10°C. The temperature of the substrate should exceed the “dew point” by 3°C during application and hardening. Temperatures should not fall below 5°C in the 24 hours after application.

Remarks

Do not cover or wash within the first 24 hours of curing. Chemical resistance: check our resistance chart. Some chemicals may cause discoloration. The product is not colour fast and may change colour over time (exhibits a yellowing effect). Colour change depends on the UV light and heat levels present and hence the rate of change cannot be predicted.

  • Reaction to fire: BFL - s1 - EN 13501-1
  • Wear Resistance: Weight loss <100 mg - EN ISO 5470-1
  • Surface Hardness: 65 (Shore D) - ASTM D2240
  • Impact Resistance: 13 Nm - EN ISO 6272
  • Capillary absorption & permeability to water: 0.001 kg/m² x h0.5 - EN 1062-3
  • Elongation at break: 60% - BS 6319
  • Slip Resistance: Method described in BS 7976-2 - Dry >40 low slip potential (in accordance with HSE and UKSRG guidelines)

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Dry to Handle (at 20°C)
8 Hours
Dry to Recoat (at 20°C)
24 hours
Fully Cured (at 20°C)
5 - 7 Days
Coverage
2.3kg per m² at 1.5mm thickness
Tensile Strength
10 MN/m²
Flexural Strength (at 20°C)
15 MN/m²
Max. Application Temperature
25°C
Min. Application Temperature
15°C
Density
1,5
Solids by Volume
100 %
Solids by Volume
100 %
Heat Resistance (up-to)
60°C (sustained dry heat)
VOC
0 g/l
Shelf Life (from date of manufacture)
1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 40°C.
Touch Dry
6 Hours
Recommended Dry Film Thickness
1 - 2 mm
Recommended Wet Film Thickness
1 - 2 mm
UN Number (Activator)
Not regulated
UN Number (Base)
Not regulated
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum 3366 Epoxy Powerfloat Floor Primer Rapid

Rust-Oleum Powerfloat Epoxy Floor Primer Rapid 3366 is a rapid curing 2-component solvent-free epoxy primer designed to improve the adhesion of coatings to difficult substrates such as power-floated concrete. Overcoatable after just 3 hours: apply primer and topcoat in one day Easy all-in-1 packaging For new and aged power floated...

Price £106.34
In stock

Rust-Oleum Thinner 641

A specially formulated blend of solvents designed to mix with its compatible Rust-Oleum coating to create an optimal consistancy for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces prior to application of the coating. Suitable for cleaning of the application tools such as Brushes,...

Price £11.33
In stock

Rust-Oleum Thinner 160

Rust-Oleum Thinner 160 is a specially formulated blend of solvents designed to mix with Rust-Oleum`s 1085 Galva Zinc, 9100 High Performance Epoxy and B95 Flexible Epoxy to create an optimal consistency for application whether it be for Brush, Roller or Spray. Can also be used for the cleaning of some surfaces or equipment. Strong dilution...

Price £14.25
In stock

Rust-Oleum Mathys 108 Surfa Etch Solution

Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system. Improves the adhesion of coating systems Neutralizes alkaline salts Also ideal to remove "white...

Price £43.88
In stock

Rust-Oleum 5421 Epoxy Floor Primer Rapid

Rust-Oleum 5421 Epoxy Floor Primer Rapid is a fast curing primer for use on new or untreated porous mineral surfaces, like concrete to bind weak and friable substrates - can be overcoated with any Rust-Oleum Mathys epoxy floor paint or polyurethane coating. Overcoatable after just 4 hours: apply primer and topcoat in one day Easy all-in-1...

Price £133.13
In stock

Rust-Oleum 3333 Super Adhesion Primer

Rust-Oleum 3333 Super Adhesion Primer provides excellent adhesion on non-porous, dense mineral substrates like: Tiles or power floated concrete Non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel Thermosetting plastics like fibreglass-reinforced polyester or epoxy Perfect chemical bond without blasting or...

Price £25.30
In stock

Rust-Oleum B95SL Flexible Self Levelling Epoxy

Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. It should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. The coating offers protection against abrasion and impact and can be applied up...

Price £118.47
In stock

Rust-Oleum 5180 Epoxy Repair Mortar

Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors. Virtually indestructable Heavy traffic friendly Chemical resistant Does not shrink or crack Easy all-in-one packaging Interior/Exterior use No primer required in most...

Price £17.86
In stock

Rust-Oleum 5401 Epoxy Impregnation Primer

Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces. Primarily intended for roller and brush application Provides a good key for adhesion on porous, mineral substrates Impregnation of porous and brittle floors Can be applied on slightly damp surfaces Also ideal...

Price £27.08
In stock

Rust-Oleum 5412 Epoxy Filler

Rust-Oleum 5412 Epoxy Filler is a solvent free, two component epoxy putty for repair of small cracks, air-pockets and/or blow-holes in concrete walls and floors. Extremely strong: 3x stronger than concrete Shrink-free Easy 1:1 mixing ratio Low odour For indoor and outdoor use

Price £34.17
In stock

11" Notched Trowel

Our 11" Notched Trowels are manufactured to a high standard from spring steel, featuring a banana shaped handle with riveted blade - single hang. The blade Size is 280x115mm (11 x 4.5 inch) with a v shaped serated notch size of 5mm. Ideal for evenly spreading mortars, screeds and high build coatings prior to finishing.

Price £17.65
In stock

Rust-Oleum De-Aeration Roller

Rustoleum De-Aeration Roller is a special spiked roller for use with selected Rust-Oleum Mathys coatings, which while wet must be spiked during application to release air to ensure a bubble-free finish.  Sold as complete assemblies with frames in standard form. For use with selected Rust-Oleum Mathys coatings The operation of spiking also...

Price £35.15
In stock