Rust-Oleum 6570 Basecoat Rapid SL

We no longer stock this product, but can recommend Sikafloor Level 30 as a great alternative.

Quantity

Description

Rust-Oleum 6570 Basecoat Rapid SL is a rapid curing, self-levelling screed to level out uneven floors. It creates a seamless smooth base and can be walked on after 2-4 hours. It’s made of strong, durable material that is not hazardous (does not contain Portland cement) and does not shrink or crack. Ideal for warehouses, production zones, aircraft hangers and more.

Rust-Oleum 6570 Basecoat Rapid SL is designed to flatten out rough concrete floors. The product can be applied with a trowel, a rake or a special spreader with triangular teeth. The recommended layer thickness is 8mm, but it is possible to apply the product at a thickness of 5-30mm. Rust-Oleum 6570 Basecoat Rapid SL be used with Rust-Oleum topcoats to provide better aesthetics and improved wear and chemical resistance.

Features & Benefits

  • Fast track floor refurbishment
  • Strong durable floor topping
  • Self levelling and rapid setting
  • Walk on after 2-4 hours
  • Install floor finishes after 24 hours
  • Single pack
  • Protein free and will not harbour bacteria

Surface Preparation

Concrete or screed substrate should be a minimum of 25N/mm², free from laitance, dust and other contamination. The substrate should be dry to 75% RH (BS8204) and free from rising damp and ground water pressure. Use Rust-Oleum 5220 Epoxyshield Sealer on porous mineral substrates.

Directions for Use

Add 3.6–3.8 litres of water per 20kg bag and mix mechanically.

Application

Pour the material onto the properly cleaned floor and spread it out evenly with a rake or a trowel. Treat the surface directly after application with the de-aeration roller to release entrapped air and to promote the self-levelling effect. The recommended layer thickness is 8mm, but it is possible to apply the product at a thickness of 5-30mm. Clean tools and spills with (hot) water before the product has started to cure.

Application Conditions

Temperature of air, substrate and coating material between 5 and 25°C. Ensure the screed is not subject to draughts and strong sunlight during the first 24 hours of curing as this may lead to cracking and crazing.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details

Data sheet

Touch Dry
2-4 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Christopher Wakeford  on 2017-09-29 16:41:38
Question: Can we use this product on a painted concrete floor it is a red high gloss paint with bare bits and unevenness ta
Answer: 

No, the concrete must be bare before application.


Question about the product

* Required fields
(read)
Send