Tor Elastaseal Embedment Coat
  • Tor Elastaseal Embedment Coat

Tor Elastaseal Embedment Coat

RC102

We no longer stock this product, but can recommend Tor Elastaseal Z Embedment Coat as a great alternative.

Quantity

Description

We no longer stock this product, but can recommend Tor Elastaseal Z Embedment Coat as a great alternative.

Tor Elastaseal Embedment Coat (RC102) is a cold liquid applied, single pack, ultra high solids, moisture activated, elastomeric urethane coating for application in conjunction with Elastamat random weave glass fibre reinforcement mats etc. To be used as the reinforcement basecoat in Elastaseal roof waterproofing membrane systems.

Preparation

Inspect all surfaces to assess soundness of existing substrate or coatings, where necessary prepare test areas. Roof surfaces must be clean, dry and free from all loose debris and surface contaminants. Repairs to cracks, holes, blisters, etc. should be carried out before application of the coating. All areas of fungal growth, moss etc. should be treated with Torkill W Fungicidal Wash (DM405) and neutralised residues removed. Priming, where necessary should be carried out using suitable compatible materials. Consult Technical Department for further advice.

Application

Brush or roller. Apply at the prescribed system coverage rate to properly prepared areas. Immediately lay Elastamat glass fibre matting into applied coating, ensuring a minimum overlap of 50mm between sheets. Roll or tamp the surfaces to ensure full integration and saturation of the matting is achieved. Allow Embedment Coat to become firm before applying Elastaseal Top Coat(s).

Limitations

  • Do not apply if rain is imminent.
  • This product is not UV stable. It should be overcoated as soon as possible, and should not on any account be used as a finishing coat.
  • Overcoating must be carried out within the recommended timescale stated otherwise further preparation will be necessary.

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Product Details
RC102

Data sheet

Application
Brush, Roller
Touch Dry
4 Hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send
16 other products in the same category:

RSL Resucoat HB Profile

Resucoat HB Profile is discontinued and no longer available as a single product; please see RSL Resucoat HB and add RSL Resucoat Profile Aggregate.

In stock

Ennis-Flint Roadline M6 Cold Applied MMA

We no longer stock this product, but can recommend viewing our range of other MMA coatings to find an alternative. Feel free to call our technical team on 0113 245 5450 if you require any additional support.

In stock

Envirograf QVFR Easy-Clean Top Coat

We no longer stock this product, but can recommend Envirograf HW Excel Top Coat as a great alternative in most instances. Before use however we recommend you contact our Technical Department on 0113 2455450 for advice on your specific project and requirements.

In stock