• Tor Transglaze

Tor Transglaze

RC105

We no longer stock this product, but can recommend Tor Transglaze Z Clear as a great alternative.

Tor Transglaze (RC105) is a single pack, high solids, moisture activated urethane membrane providing a UV and weather stable elastomeric membrane for protection, refurbishment and upgrading of plastic rooflights. Applied as a two coat system with or without reinforcement depending on rooflight condition and service requirements. Available as a clear coat.

Quantity
Product not available
This Product has been Discontinued

Description

Tor Transglaze (RC105) is a single pack, high solids, moisture activated urethane membrane providing a UV and weather stable elastomeric membrane for protection, refurbishment and upgrading of plastic rooflights. Applied as a two coat system with or without reinforcement depending on rooflight condition and service requirements. Available as a clear coat.

Preparation

All surfaces should be sound, thoroughly cleaned, dry and free from all contaminants.

1. Glass Reinforced Polyester (GRP)

  • a) New sheets – solvent wipe then lightly abrade
  • b) Weathered sheets – thoroughly scrub clean using Torclean WB Pre-wash DM416, rinse then abrade to remove loose glass fibres etc.

2. Acrylic Sheets

Thoroughly clean down to remove surface contaminants and lightly abrade

3. Polycarbonate Sheets

Thoroughly clean down to remove surface contaminants and lightly abrade

Application

Brush or roller

  • a) reinforced system – insert Tor Elastamat Regular glass fibre matting into wet coating, allow to dry then cut out any stray fibres, etc and “seal in” with a further coat of product.
  • b) Unreinforced system – apply two coats at the prescribed coverage rates.

Limitations

  • Overcoating must be carried out within the timescale stated, otherwise solvent wiping and/or abrading may be necessary to achieve satisfactory intercoat adhesion.
  • This product is moisture sensitive. Take out a working quantity and reseal tin immediately.
  • Self contained breathing apparatus should be worn when spraying.
  • Application to clean glass is possible, though wet adhesion cannot be guaranteed.
Product Details
RC105

Data sheet

Manufacturer
Tor Coatings
For Use On
GRP, Acrylic Sheets, Polycarbonate Sheets
Application Method
Brush, Roller
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller
Coverage
3 - 4m² per litre
Touch Dry
3 Hours
UN Number
UN1263
Brand
Tor Coatings

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send