Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat

THAGBCC

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is an anti-graffiti, decorative, flame retardant coating for bare & painted walls. It is a water-based, high durability two-pack coating, designed to enable removal of graffiti through use of graffiti removers.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Quantity
Product not available
This Product has been Discontinued

Description

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is an anti-graffiti, decorative, flame retardant coating for bare & painted walls. It is a water-based, high durability two-pack coating, designed to enable removal of graffiti through use of graffiti removers.

Also available with Thermoguard Flame Retardant Anti-Graffiti Clear Glaze as part of the Thermoguard Flame Retardant Anti-Graffiti BS Class 1/0 & EN Class B System. The Bonding Primer Colour Coat provides excellent adhesion & opacity. The Clear Glaze provides exceptional resistance to oils, inks, crayon, marker and spray paints

When used in conjunction with Thermoguard Flame Retardant Anti-Graffiti Clear Glaze, 1 coat of each combine to upgrade high-flamespread-risk “multilayer” painted walls to Class O and Class B s1 dO.

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat contains high grade fade-resistant coloured pigments & adhesion promoters.



Quick Links - Click To Jump To Section:




Features & Benefits




Colour Range & Finish


  • Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat - Clear, White, BS 4800 + RAL wall colours
  • Thermoguard Flame Retardant Anti-Graffiti Clear Glaze - Clear finish applied over Bonding Primer Colour Coat



Fire Test Standards


BS 476 Parts 6 + 7 Class O and Class B s1 dO

To bare, painted & multi-layer painted walls:



Available Systems


Available as part of the Thermoguard Flame Retardant Anti-Graffiti BS Class 1/0 & EN Class B System.



Surface Preparation


  • Surfaces should be clean, dry & free from contamination
  • Existing paint must be firmly adhered
  • Abrade old Anti-Graffiti or other hard, smooth, impermeable paints with 120 grit abrasive to get a good key & dust off
  • Ensure good ventilation and do not apply if condensation may occur
  • Seal bare areas with 1 coat thinned 5% with water



Application


  • Apply by brush, roller or spray
  • Air min. 10°C, surfaces min 3°C above dew point during application & drying
  • Stir base and activator thoroughly, then mix, stirring to create a homogenous mix (a paint stirrer on an electric drill is recommended)
  • Pot life once mixed 2 hours

Apply:

  • 1 coat Thermoguard Flame Retardant Anti-Graffiti Bonding Primer Colour Coat. Note: 2 coats MUST be applied on bare surfaces or contrasting colours
  • 1 coat Flame Retardant Clear Glaze



Composition


  • Bonding Primer Colour Coat – High grade fade-resistant coloured pigments & adhesion promoters
  • Clear Glaze – High durability scrub, Flame Spread & Chemical Resistant Resin

Both are water-based.



Curing


Curing Times @20°C
Touch dry 4hrs
Hard Dry 8-12hrs
Full Cure 7-10 Days
Minimum Overcoating Time 24hrs
Maximum Overcoating Time 72hrs

Colder temperatures or high humidity delay dry, cure & hardening.



Storage


  • Store in tightly closed original container in a dry, cool and well-ventilated place
  • Store in closed original container at temperatures between 5°C and 25°C
  • Protect from freezing and direct sunlight
  • Keep upright



Coverage


  • A 5kg pack typically covers 40m² when applied in a single coat



Project Fire Certificate


  • Thermoguard issue a Fire Certificate for completed projects for property managers to demonstrate Duty of Care compliance. Click here to apply



Health & Safety


For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.



Product Details
THAGBCC

Data sheet

Manufacturer
Thermoguard
Water / Solvent Based
Water
Application Method
Brush, Roller, Spray
Sheen
Semi-Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Two-Pack
Product Certifications
BS 476 Parts 6 + 7 Class O and Class B s1 dO
Pack Size
5KG
Application
Brush, Roller, Spray
Touch Dry (at 20°C)
4hrs
Fully Cured (at 20°C)
7-10 days
Pot Life (at 20°C)
2hrs
Coverage
40m² per pack
Touch Dry
4 Hours
UN Number (Activator)
N/A
UN Number (Base)
UN3082
Hard Dry
8-12 hours @20°C
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Thermoguard Flame Retardant Anti-Graffiti Clear Glaze

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Thermoguard Flame Retardant Anti-Graffiti Clear Glaze is a flame-retardant clear gloss sealer and anti-graffiti coating for a variety of...

In stock

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery

Thermoguard Flame Retardant Anti-Graffiti BS Class 1/0 & EN Class B System

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Thermoguard Flame Retardant Anti-Graffiti BS Class 1/0 & EN Class B System is a system kit providing an anti-graffiti, decorative, flame...

In stock