Envirograf HW Acrylic Top Coat

Product 42 - HW Acrylic

Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.

Quantity

Description

Envirograf HW Acrylic Top Coat is a coloured, water based topcoat for use over Envirograf HW01 White Intumescent CoatingES/VFR White Fire Protection Coating and EP/CP Fire Protection Coating. Designed as a high quality internal coating for general use, it is ideal for plasterboard, lath-and-plaster and as a coating for plaster, masonry, etc.

Preparation & Application

All surfaces should be clean, dry and free from contamination.

Envirograf HW Acrylic Top Coat can be applied by brush, roller or spray. It can be thinned with up to 5% with clean water. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.

In most instances apply 2 coats @ 12m² per litre.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 42 - HW Acrylic

Data sheet

Application
Brush, Roller, Spray
Coverage
12m² per litre
Touch Dry
1 Hour
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Colin Glancy on 2017-08-28 08:44:15
Question: We are having a log burner installed and we are looking for a paint that we can use to bring out the feature of the log burner Can I use this paint in my fireplace, Many thanks Colin
Answer: 

Please refer to our Blog post on Painting the Walls around a Fireplace or Multi Fuel Stove for more information.


Question about the product

* Required fields
(read)
Send