

OPEN AS USUAL DURING LOCKDOWN #3
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.
OrEnvirograf Stabond Stabilising Bonding/Sealing Liquid is a transparent water based bonding/sealing liquid for porous/friable surfaces such as plaster ceilings or walls (to seal the surface over old flaky plaster or new plaster) and to seal wood when using Product 38 Intumescent Material for door upgrades.
Envirograf Stabond Stabilising Bonding/Sealing Liquid is solvent free and supplied ready to use. The product has been designed to be readily absorbed to form a stable surface finish for application of fire retardant coatings, emulsions, varnishes and adhesives (including double-sided tape). Good for sealing prior to using Product 38 (included in door upgrade kits), Product 92 Coating System for wood, Product 105 (EP/CP paint for plasterboard) and Product 84 (Fireproof Paper)
Wash the doors down with detergent water and clean off with warm, clean water. Ensure that all wax and grease has been cleaned off. An Envirograf de-waxing fluid is available if required. Rub all the panels with coarse glass paper and be certain to dust off and remove all flaking varnish and ensure all corners are given a good key, then apply one coat of Envirograf Stabond Stabilising Bonding/Sealing Liquid.
Tack free time: Approximately 10 minutes depending on surface type, temperature and humidity.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.