Envirograf ES/VFR Hard Wearing Clear Top Coat
Envirograf ES/VFR Hard Wearing Top Coat is a clear, water-based top coat for internal use only over ES/VFR Clear Fire Protection Coating, with no need for an undercoat.
All surfaces to be painted should be clean, dry and free from loose and flaking material. Stir well before use.
Apply one coat at 12m² (for internal use). Brush evenly in long strokes along the grain of the wood. Do not apply in temperatures below 10°C. High humidity will retard the drying process. Add 10% water for spraying, touch dry in 1 hour, recoatable after 4 hours.
Clean equipment immediately after use with warm soapy water and rinse thoroughly.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- 12m² per litre
- Touch Dry
- 1 Hour
|Andy Brice on 2020-02-10 12:23:45|| |
Can you paint over this?
This can be over coated but we would advise to carry out a small test area first just to ensure compatibility between coats.
|claire hooper on 2019-11-26 13:26:20|| |
Hi there does this product yellow over time and can I use it over acrylic paint on a plastered wall? thank you
This product is not recommended to be applied over existing coloured paints, it is to be used as a topcoat for clear envirograf fire protection systems on wood.
|Hangyul on 2019-02-08 03:45:18|| |
Dear sir, I am a student, i would like to use this for plastic for fire proofing and making durable with high temperature. Is it suitable for plastic? what the difference between this product and other coat for wood? Thank you.
Envirograf ES/VFR Hard Wearing Clear Top Coat is not suitable for plastic surfaces.