• Envirograf HWAP Primer

Envirograf HWAP/WB Primer

Product 42 - HWAP/WB

Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.

Quantity

Description

Envirograf HWAP/WB Primer is a clear water based primer for use under Envirograf HW01 and HW02N Intumescent coatings. It can be applied over existing paint systems or wood stains to improve adhesion of the fire protection coating to the substrate.

Application & Coverage

Envirograf HWAP/WB Primer can be applied by brush or roller. Coverage is 10-12m² per litre.

Note: It is important to ensure the moisture content of the wood substrate is below 17% before application.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 42 - HWAP/WB

Data sheet

Application
Brush, Roller
Coverage
10 - 12m² per litre
Touch Dry
1 Hour
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions Alan  on 2019-10-30 12:59:26
Question: 

what is the recoat time of the water based primer HWAP/WB

Answer: 

In good drying conditions 1-2 hours. The product when applied will be milky in appearance and when dry is clear.


Question about the product

* Required fields
(read)
Send
You might also like

Envirograf HW01 White Intumescent Coating

Unfortunately, we no longer stock this product. Thermoguard Timbercoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use. Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your project and get...

In stock

Envirograf HW02N Clear Intumescent Coating

Unfortunately, we no longer stock this product. Thermoguard Fire Varnish Basecoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use. Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your...

In stock