Preparation and Application
All surfaces should be clean, dry and free from contamination, with no loose particles.
Apply over Envirograf HW01 White Intumescent Coating with either brush, roller or spray. Do not thin – use straight from the can. However, when applied by spray, up to 10% water may be added. The coating is touch dry in 2 hours.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- Brush, Roller, Spray
- 10 - 12m² per litre
- Touch Dry
- 2 Hours
Be the first to ask a question about this product!