Envirograf HW Premier Top Coat
Envirograf HW Premier Top Coat is a coloured, water-based product to apply over Envirograf HW01 White Intumescent Coating with no need for an undercoat. Available in matt, satin or gloss finishes, it is for internal use only.
Preparation and Application
All surfaces should be clean, dry and free from contamination.
Envirograf HW Premier Top Coat is ready for use and does not need thinning. Stir well before application. The result is dependent on the condition of the substrate and temperature of application.
Apply one coat at 10 - 12m² per litre.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- Brush, Roller, Spray
- 10 - 12m² per litre
- Touch Dry
- 1 Hour
Be the first to ask a question about this product!