• Envirograf HW05 Clear Top Coat

Envirograf HW05 Clear Top Coat

Product 42 - HW05

Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.



Envirograf HW05 Clear Top Coat is a clear, solvent based, hard-wearing top coat for use over Envirograf HW02N Clear Intumescent Coating and Envirograf ES/VFR Clear Fire Protection Coating and Envirograf QVFR Clear Fire Protection Coating. It forms a very hard surface, two coats make it suitable for surfaces which are liable to be damaged through hard wear.

Preparation and Application

Ensure that the Envirograf HW02N Clear Intumescent Coating, Envirograf ES/VFR Clear Fire Protection Coating or Envirograf QVFR Clear Fire Protection Coating surface to be coated is completely clear and dry before applying Envirograf HW05 Clear Top Coat.

Stir well before application. May be applied using brush or spray. The result is dependent on the condition of the substrate and temperature of application. Touch-dry in 20 minutes. Re-coatable in 4 hours.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 42 - HW05

Data sheet

Brush, Spray
12m² per litre
Touch Dry

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields
You might also like

Envirograf HW02N Clear Intumescent Coating

Unfortunately, we no longer stock this product. Thermoguard Fire Varnish Basecoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use. Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your...

In stock