Envirograf HW Ultimate Clear Top Coat
Envirograf HW Ultimate Clear Top Coat is a specially formulated, quick drying, hard-wearing water based protective top coating for INTERNAL use. It can be applied by brush, roller, or spray and it comes in either a matt or satin finish.
All surfaces should be clean, dry and free from loose particles and contamination.
Envirograf HW Ultimate Clear Top Coat can be thinned using up to 5% water. Stir well before application. The result is dependent on the condition of the surface and temperature of application. The coverage rate is 10-12m² per litre, For hardwearing areas apply 2 coats. Up to 10% water can be added for spray application.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- Brush, Roller, Spray
- 10 - 12m² per litre
- Touch Dry
- 2 Hours
Be the first to ask a question about this product!