Envirograf 3-2-1 Standard Fire Retardant Liquid
Unfortunately, we no longer stock this product. Hydron Nu-Flame Synthetic & Fabric Protector may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.
Envirograf 3-2-1 Standard Fire Retardant Liquid is a clear, aqueous and odourless flame-retardant liquid for use on many absorbent materials - see product data sheets for full details available to download from the 'attachments' section above.
Preparation & Application
See product data sheets in the 'attachments' section above.
Available in different sized bottles and sprays, with starter packs that include a 500ml refillable sprayer bottle.
- Coverage can vary greatly depending on the type of substrate and absorbency.
- For suitable applications, contact the Technical Department.
- Trials in small areas must always be carried out prior to full application to ensure performance and appearance.
- Seek approval from the relevant authority for this product/system including test data prior to purchase/use (test data available upon request).
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
- 5 - 10m² per litre
|Fraser on 2018-12-03 14:34:55|| |
Can I use this on railway sleepers that I will use to build a fire surround for a log burner? Sleepers will be requisite 16 inches from opening. Will the liquid be necessary/ suitable/ advisable?
Envirograf 3-2-1 Standard Fire Retardant Liquid is not for use on timber, something similar that you can use on bare timber would be Zeroflame Fire Retardant Treatment.This soaks virtually ‘invisibly’ into woods and achieves Euroclass B (BS Class 0) Fire Propagation and Spread of Flame fire protection on solid timbers. However whether this would be appropriate for your project we wouldn't know, as we would assume the use of timber of any kind fire rated or not in close proximity to a log burner would not be advisable.
|Robert on 2018-09-28 23:39:28|| |
Would you need to reapply it on fabrics if so how often? Or would it depend on the fabric it's applied to?
Once a suitable fabric has been treated with Envirograf 3-2-1 Standard Fire Retardant Liquid it will only need to be re-applied after the fabric has been washed.
|HANA on 2018-08-16 14:54:53|| |
IS THIS LIQUID COLORLESS ? CAN I USE IT ON 100% POLYESTER MATERIALS AS ROLLO BLINDS? AFTER USING IT MATERIAL WILL NOT HAVE MORE WEIGHT FROM INITIAL WEIGHT?
Envirograf 3-2-1 Standard Fire Retardant Liquid can be used on 100% polyester, it will change the weight when it is first applied but once dry the weight difference should be negligible.
|Debbie dyke on 2018-07-21 19:49:33|| |
Hello Could you please tell me what size your container sizes will cover please re the retardant spray. Thankyou
As a guide to coverage Envirograf state - for curtains, bed covering, etc., 6-10m² per litre. Foam filled furniture, approximately 5-7 m² per litre, according to the amount of polyurethane foam.