Sherwin-Williams FIRETEX FX9500, a 2 -pack exterior durable intumescent offering 60, 90 & 120 minute fire protection both internally and externally without topcoat, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site.
Sherwin-Williams FIRETEX FX9500 is an exterior durable intumescent, which can be applied directly onto blast cleaned steel and is suitable for application in-shop and on site, provided the conditions listed in the product data sheet are adhered to. For use in internal and external environments without topcoat.
Sherwin-Williams FIRETEX FX9500 utilises hydrocarbon fire technology and a long standing track record which includes some of the world's most iconic structures marking the next generation in epoxy intumescent coatings, on projects where external long term durability is a concern.
Offering an aesthetically pleasing appearance which requires no back rolling or sanding, Sherwin-Williams FIRETEX FX9500 is a cost effective, scrim free, high volume solids product, with user friendly application properties which can be applied by single airless leg spray.
Please note that this product should not be used without first receiving an application schedule from our Technical Department. Please download and complete the 'FIRETEX Intumescent Support Request Form' and return by email to [email protected]
If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).
*As defined in ISO 12944-2:1998 with appropriate maintenance.
**Based on 60 minute protection, 25-30% would be achieved on 120 minute protection
Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon 7300, Acrolon 1850 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature.
Sherwin-Williams FIRETEX FX9500 is indefinitely over-coatable with itself.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 James Staunton on 2024-01-23 10:46:48 | Question: Clearance requirement for other services. There is fire rated ductwork within 50mm from FX9500 Intumescent paint. As this is fire rated ductwork will the clearance still be required? Regards, James |
Answer from Rawlins’ Technical Team: This product requires the expansion gap to be at least 15 times the applied DFT of the product, so it will be dependent on the DFT Thickness of the applied product as to whether it falls within a 50mm expansion. Due to being fire rated, you would need to discuss this with your contracts Fire Engineer. If you require further assistance please contact [email protected] . | |
Sherwin-Williams FIRETEX FX9500 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Sherwin-Williams Acrolon 1850 is a two pack Isocyanate free finish based on an acrylic epoxy binder system. It is a finish coat for exterior exposed surfaces where retention of gloss is required, and the use of isocyanate products is precluded or undesirable. Available in 400+ colours, including RAL and BSCoverage Calculator More...
£182.83 (incl. VAT)
£152.36 (ex. VAT)
We no longer stock this product, but can recommend Sherwin Williams Fast-Clad 7220 as a great alternative.
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Sherwin-Williams Acrolon 7300 is a high solids, tin free polyurethane, with fast drying and high gloss attributes. Acrolon 7300 can suitable for use where long term exterior gloss and colour retention characteristics are required. Gloss levels:Gloss: 70%+ Semi-Gloss - approx. 40% Available in 450+ coloursProfessional use only -...
£128.69 (incl. VAT)
£107.24 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
