Sherwin-Williams Macropoxy M182
We no longer stock this product, but can recommend Sherwin-Williams Macropoxy L425 as a great alternative.
Sherwin-Williams Macropoxy M182 (formerly known as Resistex M182) is a single pack epoxy anti-corrosive primer, used as an oil resisting primer for application onto ferrous substrates.
Blast clean to Sa21⁄2 BS EN ISO 8501-1:2007. Average surface profile in the range 30-50 microns.
Ensure surfaces to be coated are clean, dry and free from all surface contamination.
Application Conditions & Overcoating
In conditions of high relative humidity, i.e. 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C.
Application at ambient air temperatures below 5°C is not recommended
- For Use On
- Application Method
- Airless Spray, Spray, Brush, Dip Coating, Flow Coating
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- 11.1m² per litre
- Touch Dry
- 1 hour
- UN Number
Be the first to ask a question about this product!