Sherwin-Williams M600

We no longer stock this product, but can recommend Sherwin-Williams Kem-Kromik 155 as a great alternative.

Quantity
Product not available
This Product has been Discontinued

Description

We no longer stock this product, but can recommend Sherwin-Williams Kem-Kromik 155 as a great alternative.

Sherwin-Williams M600 (formerly known as Leighs M600) is a quick drying single pack alkyd anti-corrosive primer pigmented with zinc phosphate, used for the protection of steel where speed of drying is important.

Recommended Topcoats

Indefinitely overcoatable with a wide range of materials, including alkyd, chlorinated rubber and vinyl systems. 

Surface Preparation

Blast clean to Sa21⁄2 BS EN ISO 8501-1:2007. Average surface profile in the range 50-75 microns.

Manually prepared surfaces should be prepared to a minimum standard of ST3 BS EN ISO 8501-1:2007 at the time of coating. Ensure surfaces to be coated are clean, dry and free from all surface contamination. 

Application Conditions & Overcoating

In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3°C above the dew point and always above 0°C.

Application at ambient air temperatures below 5°C is not recommended. 

Product Details

Data sheet

Application
Brush, Spray
Coverage
5.8m² per litre
Touch Dry
15 minutes
Brand
Sherwin-Williams

Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send