Sherwin-Williams Transgard TG159
We no longer stock this product, but can recommend Sherwin-Williams Transgard TG110 as a great alternative.
Sherwin-Williams Transgard TG159 is a two pack epoxy aluminium pigmented sealercoat and is used as a sealer for aluminium metal spray.
Highways Agency Item No.159.
Indefinitely overcoatable with epoxy systems provided the sur- faces to be coated have been suitably cleaned. Where a high degree of gloss and colour retention is required, overcoat with Acrolon C137V2 within 7 days at a minimum dft of 50 microns. These overcoating times refer to achievement of optimum adhesion at 23oC and will vary with temperature.
Application Conditions & Overcoating
Transgard paints should preferably be applied at tem- peratures in excess of 10oC. In conditions of high relative humidity, ie 80-85% good ventilation conditions are essential. Substrate temperature shall be at least 3oC above the dew point and always above 0°C.
At application temperatures below 10°C, drying and curing times will be significantly extended, and spraying characteristics may be impaired.
Application at ambient air temperatures below 5°C is not recommended.
In order to achieve optimum water and chemical resistance, temperature needs to be maintained above 10oC during curing.
If it is desired to overcoat outside the times stated on the data sheet, please seek advice of Technical Team.
- For Use On
- Application Method
- Airless Spray, Spray, Brush
- Standard / Ready Mixed
- Single, Two or Three Pack
- Product Certifications
- Highways Agency Item No.159
- Pack Size
- 17.0m² per litre
- Touch Dry
- 1 Hour
- UN Number (Activator)
- UN Number (Base)
Be the first to ask a question about this product!