Nullifire PM020 High Build Alkyd Primer is a fast drying steel primer that provides corrosion protection on structural steel. Rapid cure VOC compliant for most areas Good for filling properties on rough and pitted steel
Nullifire PM019 Primer for Blasted Steel Substrates
Nullifire PM019 Primer for Blasted Steel Substrates is an anti-corrosive transport primer for temporary protection of blasted steel substrates, which will be finished with a compatible basecoat. Applied at standard film thickness, the protection in outdoor conditions is limited to approximately 3 months. Within this period of time the finishing coating system needs to be applied.
Features & Benefits
- Up to 3 month’s protection for blasted steel substrates prior to application of basecoat
- Easy to apply using airless spray equipment
- Protects steel in transit from shop to site
- Tested with Nullifire basecoats to ensure compatibility
- Water / Solvent Based
- For Use On
- Application Method
- Airless Spray
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- Brush, Roller, Spray
- 9.3m² per litre
- Touch Dry
- 16 Hours
- UN Number
Be the first to ask a question about this product!
Nullifire PM015 Aluminium Epoxy Primer is a high-build, low temperature curing modified aluminium epoxy mastic. Nullifire PM015 provides unequaled levels or barrier protection and corrosion resistance over existing finishes and rusted or St2/St3 cleaned steel. Suitable as a topcoat for most tightly adhered existing coatings. Excellent...
Nullifire PM018 Primer or Top Seal Epoxy Coating is a two-components modified epoxy coating. It is a heavy duty, high build coating for protection of steel in corrosive environments and is excellent for use at low temperatures. Excellent immersion performance in both fresh and sea water. Suitable as a rust preventing coating in ballast...
Nullifire PM021 General Purpose Epoxy Primer is a two-components epoxy polyamide primer with excellent resistance to salts, water and alkalies, and with very good resistance to mild acids and solvents. To qualify for Express (1-3 day) shipping, basket value must exceed £75.00 + VAT. Orders below this amount will be available on Economy (7-10...
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...