

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Remmers iQ-Paint IR is a heat reflecting, low emission, solvent and plasticizer-free, interior wall paint. Wet abrasion according to DIN EN 13300, class 3. Wash resistant according to DIN 53 778. Remmers iQ-Paint IR is used for opaque coating of the iQ-Therm System and areas adjacent to surfaces restored with the iQ-Therm System, on mineral renders in groups P I to P III as well as gypsum plasterboard, wallpaper (rough fibre) and old, matt, loadbearing dispersion coatings.
iQ-Paint IR was especially developed for finishing the Remmers iQ-Therm System and areas adjacent to the restored surfaces. Radiant heat from radiators and other sources of radiation (e.g. humans) is reflected back into the room by iQ-Paint IR. This allows rooms to heat more quickly. The degree of IR reflection of iQ-Paint IR is 41% in the relevant wave length of 10 μm. Normal interior paints have an 8% degree reflection. The arithmetical U value can be reduced by up to 8% (a conversion is necessary for old buildings; see report by ZAE Bayern).
Remmers iQ-Paint IR is a high yielding, interior wall paint with excellent hiding power that is easy to apply.
Features & Benefits
Notes
iQ-Paint IR is a functional coating. Mechanical wear may cause dark marks to form on the surface. This is only an aesthetic problem; the IR reflecting properties of the coating are not impaired. If improperly applied, roller marks may be visible in glancing light. There may be slight differences in the colour of different batches because of the mineral aggregates used. Always use material from the same batch for continuous surfaces.
Special colours are available on request but may be subject to minimum quantities, additional cost and extended lead times - contact the Technical Department for more information.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.