Remmers Spiral Anchor Mortar M30 is a single component, polymer-modified, dry mortar with hydraulic binders, silica fume and mineral aggregates used for repairing cracks and creating frictionally coupled bonds between spiral anchors and masonry work in indoor and outdoor areas. The mortar has high adhesive bonding strength, adheres to the substrate well and sets with little shrinkage.
Spiral Anchor Mortar M30 is a polymer-modified, factory-mixed, dry mortar that is highly sulphate resistant, has a low effective alkali content and is ready to use after mixing with water. The mortar has high adhesive bonding strength, adheres to the substrate well and sets with little shrinkage. In spite of its high smoothness, the material has excellent stability.
Depending on the masonry work, the user can choose between two strength classes, M20 (Art. No. 1028) and M30 (Art. No.1030). Suitability testing was carried out by iBMB MPA TU Braunschweig and documented in Test Report No. 1791/324/11. Low in chromates according to RL 2003 / 53 / EC.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior/Exterior Use
- Dry to Recoat (at 20°C)
- 24 hrs
- Recommended Thinner/Cleaner
- Max. Application Temperature
- Min. Application Temperature
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
Be the first to ask a question about this product!