Envirograf Rebated Intumescent Fire Seals are intumescent self-adhesive seals for rebating, supplied in lengths of 1050mm and 2020mm. Available in white, brown, black red and on request (and additional cost/lead time) real wood veneer or polished aluminium face finishes. These seals offer half hour and one hour protection and are for use in frames, edges of fire doors and behind door frames. Once fitted the facing of the seal can be painted if required.

Application

• Seals can be easily cut to size to fit length of door edge or door frame.
• Rout a suitable channel in door edge or frame surround so seal fits flush with edge. Seal should be fitted down centre of door edges or to meet centre of door edge if fitted in frame.
• Once happy that routed channel is deep enough peel off backing strip to expose self-adhesive backing and fix seal in place.
• Once fitted the face of the seal can be painted to match surround if required.

Ordering References

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.