Envirograf Rebated Acoustic, Draught, Smoke and Weather Seal
Unfortunately, we no longer stock this product. Norseal Stopmaster Typhoon Door Seals may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.
Envirograf Rebated Acoustic, Draught, Smoke and Weather Seal is a 3mm deep x 10mm wide x 2100mm long aluminium or plastic holder (black, brown, cream, grey, red, or white plastic) containing a brush seal in various sizes and colours or a black rubber seal in various sizes and patterns. The holder has a self-adhesive backing for ease of fitting. The seal holder is rebated into wooden doors or windows and adhered to the surface of metal windows using the self-adhesive backing on the base of the holder. It can be fitted to single or double doors, folding doors, sash windows, etc.
Features & Benefits
- Plastic holder comes in black, brown, cream, grey, red or white- The holder has a self-adhesive backing for ease of fitting.
- The seal holder is rebated into wooden doors or windows and adhered to the surface of metal windows using the self-adhesive backing on the base of the holder.
- Can be fitted to single or double doors, folding doors, sash windows and more.
|Ref||Description||Width x Depth||Size (Length)||Colours|
|ES/AH||Aluminium holder only||10mm wide x 3mm deep||2100mm||Anodised aluminium|
|ES/AHS||Aluminium holder (with seal - see table below)|
|ES/PH||PVC holder only||10mm wide x 3mm deep||2100mm||Black, Brown, Cream, Grey, Red, White|
|ES/PH||PVC holder (with seal - see table below)|
|ES/PHS||PVC holder only||1050mm|
|ES/PHS||PVC holder (with seal - see table below)|
|B||Brush seal||5mm, 7mm, 10mm|
|A||Rubber type angled blade||6mm, 9mm|
|T||Rubber type tubular seal||6mm, 9mm|
|V||Rubber type V blade||6mm|
|S||Rubber type straight blade||5mm, 7mm, 9mm|
Make a rebate in the door or frame to suit the 2mm deep x 10mm wide holder. Always add 1mm to the width of the holder for the rebate to allow for the shrinkage of timber / paint. Remove the cover paper from the holder’s self-adhesive backing then position the seal and fix. Finally, secure each end with panel pins. The holder can be painted but NOT the seal fitted to it.
Note: ensure that new wood is sealed before adhering the holder.
Important – 1-1½mm of the brush or rubber seal is held within the holder. Brush with fin is always ½mm higher than regular brush. Make allowance for this when specifying.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!