Envirograf Acoustic, Draught, Smoke and Weather Threshold Seals
Unfortunately, we no longer stock this product. Norseal Athmer Alubros Brush Strip may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.
Envirograf Acoustic, Draught, Smoke and Weather Threshold Seals are 7mm deep x 12mm high x 2m long aluminium holders fitted with a brush seal available in 15mm, 25mm and 50mm standard brush depths. Supplied in self-coloured milled aluminium finish or painted black, brown or white at extra cost. For sealing the bottom of doors, the back edge of sliding doors, between the wall and door and down the centre of the stiles of doors. Particularly good for industrial light to heavy use.
A white plastic self-coloured holder 2.1m long (ES/TB/P) is also available, fitted with a fixed brush seal 25mm or 40mm depth. An adjustable version is available which is a 2.1m long white plastic holder (ES/ATB) that permits three press-fit adjustments of the position of the brush seal, and the holder is supplied with either 25mm or 50mm brush depth. For sealing the bottom of doors, sliding doors and for use with products 106 and 107. Suitable for sealing over tiled floors and linoleum or vinyl floor coverings.
|ES/TB/15||15mm brush and 2m long aluminium holder||Aluminium, black, brown, white|
|ES/TB/25||25mm brush and 2m long aluminium holder||Aluminium, black, brown, white|
|ES/TB/50||50mm brush and 2m long aluminium holder||Aluminium, black, brown, white|
|White plastic holder with adjustable-depth brush|
|ES/ATB/25||25mm brush and 2.1m long plastic holder||White|
|ES/ATB/40||40mm brush and 2.1m long plastic holder||White|
|White plastic holder with fixed-depth brush|
|ES/TB/P25||25mm brush and 2.1m long plastic holder||White|
|ES/TB/P40||40mm brush and 2.1m long plastic holder||White|
Place the seal into position and fix with screws supplied. The holder can be painted but do not paint the brush seal.
ES/TB/P – Supplied with a fixed brush. Place seal into position and fix with pins supplied.
ES/ATB – Supplied with separate brush. Simply pull the cord to free the brush then place in the plastic holder at the chosen position for the best seal - there are three press-fit positions to choose from. Place seal into position and fix with pins supplied.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!