Envirograf Intumescent Glazing Strips are a compressible intumescent strip 2mm thick, finished in white, black, brown, red and grey with double-sided tape on one side. Supplied in 10m rolls and used in timber/steel doors and partitioning, the strips are fitted to beads each side of glazing only. Although the seal is 2mm thick it will compress to 0.5mm and it will not affect its performance.

Ordering References

Features & Benefits

• Used in steel doors, wood doors, and partitioning to provide up to 65 minutes fire protection
• Strips are fitted to beads each side of the fire-rated glazing
• The 2mm thick seal can be compressed to 0.5mm to fit smaller gaps without compromising its performance

Application

The strips are fitted to beads each side of the fire rated glazing. Although the seal is 2mm thick, it will compress to 0.5mm while not affecting its performance. For 30 minutes glazing 10mm or 15mm beads must be fixed with 36mm panel pins at 200mm centres. For 60 minute glazing 20 – 25mm beads using 60mm No8 CS steel screws at 200mm centres to fix. Grip the self-adhesive backing strip and separate the protective paper from the adhesive. Pull along for a few centimetres to expose the adhesive surface ready for adhering onto the glazing beads. Attach the intumescent strip to the face of the bead, peeling away additional backing paper as necessary. Fix beads in place with the glazing strips towards the glass.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.