Envirograf Door Stop for Acoustic, Draught and Smoke Protection is a door stop set without intumescent seals, but supplied as standard with a 5mm brush smoke seal. Other seals can be used (See Envirograf Rebated Acoustic, Draught, Smoke and Weather Seal (Product 73)). All seals give smoke and draught protection, moulding available in brown, white or natural ready for staining.

Features & Benefits

• Can be fitted with acoustic seals which also serve as draught and smoke seals
• Designed to replace and improve upon standard wooden door stops

Application

Remove the backing paper from the seal, position the seal and fix. Finish the fixing with panel pins, securing each end and at 300mm intervals. Used as a surface-mounted door stop. The standard smoke seal supplied is a 5mm brush. Rubber seals may also be used (see technical data sheet).

SDSTOP Single Door Set Contains;

2 x 2100mm pieces and 1 x 1050mm piece

DDSTOP Double Door Set Contains;

3 x 2100mm pieces and 1 x 'ES25/HS' piece

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.