Envirograf Intumescent Push-Fit Door Seals
Envirograf Intumescent Push-Fit Door Seals are plastic intumescent fire and smoke seals. Simply clips in to routed groove with no need for adhesive or pins. Available in brown or white and in 2100mm lengths. Available with or without brush or rubber smoke seal.
Features & Benefits
- Available with brush or rubber smoke seals to seal gaps up to 15mm
- Ideal for replacing existing rebated door seals and upgrading doors
- Can be used on single or double action doors
By simply routing a groove 5mm deeper than required for the seal itself, the additional grooving if door edges need further planing is eliminated. When the door set correctly closes and is ready for use the carpenter just clips the seal into the groove. Ease of use during redecoration: the seal can be easily removed from the top or bottom of the door using a screwdriver to release it so that decoration can occur without damaging the seal. Once decorating is completed the seal can be clipped back into place.
For single doors, an angled seal will suit a gap size of 6mm down to 3mm.
Important – 1-1½mm of the brush or rubber seal is held within the holder. Brush with fin is always ½mm higher than regular brush. Make allowance for this when specifying.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
|Karen Lloyd on 2019-06-22 16:07:37|| |
Hi, I need push fit fire door seal for a single door. The groove width is 7mm. Which of the specification should I order? With thanks Karen
This product only comes in widths of 10mm or 15mm.