Britannia Stabilising Masonry Solution

SMAS

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.

Britannia Stabilising Masonry Solution is a solvent-based stabilising solution for friable and chalking surfaces.

  • Internal and external use
  • Highly penetrating
  • Pliolite resin-based acrylic solution
  • Produces a surface suitable for decoration
  • Surface dry in 1-2 hours

Quantity
Product not available
This Product has been Discontinued

Description

Britannia Stabilising Masonry Solution is a stabilising solution for friable and chalking surfaces, producing a substrate suitable for further decoration.

It is a solvent based, highly penetrating single pack, pliolite resin-based acrylic solution.

Britannia Stabilising Masonry Solution is surface dry in 1-2 hours after application. Can be brush, roller (solvent resistant) or spray applied.

Not suitable for use under solvent based products except Britannia’s Wallshield exterior wall coatings.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Solvent-based
  • Internal and external use
  • Single pack
  • For application to friable and chalking surfaces
  • Produces a substrate suitable for further decoration
  • Surface dry in 1-2 hours
  • Pliolite resin-based acrylic solution



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • As a guide between 120-160 square metres/20 litres (6-8 square metres/litre)



Drying Time


  • Surface dry in 1-2 hours
  • Drying depends upon the thickness of the coating
  • Re-coatable overnight



Preparation


  • All surfaces must be dry and free from mould growth, dirt and grease
  • Algal or Fungal deposits should first be removed by power washing the surface and then coated with Britannia’s Fungicidal Wash Solution



Application


  • Stir well before use
  • Can be by brush, roller (solvent resistant) or spray applied
  • Apply liberally to the substrate to allow for thorough penetration
  • On some surfaces a second coat may be required

Do not over seal the surface.

A high gloss indicates that the surface has been over sealed, these areas should be rubbed down prior to painting.



Shelf Life & Storage


  • Up to 2 years if stored correctly in an unopened container



Precautions


  • Flammable keep away from sources of ignition
  • Ensure good ventilation during application
  • Wear gloves, goggles and suitable protective clothes
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
  • Keep out of reach of children
  • Do not use near fishponds
  • Toxic to aquatic organisms
  • May cause long term adverse effects in the aquatic environments
  • Do not empty into drains



Product Details
SMAS

Data sheet

Manufacturer
Britannnia
For Use By
Consumer Use
Single, Two or Three Pack
Single
Pack Size
5L, 20L
Coverage
6-8m² /lt dependent on substrate
Touch Dry
Surface dry in 1-2 hours. Drying depends upon the thickness of the coating. Re-coatable overnight.
UN Number
UN1263
Colour(s)
Clear
Base Type
Solvent-Based
Exterior / Interior Use
Exterior & Interior Use
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Britannia Stabilising Masonry Solution is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Britannia Fungicidal Wash Solution

Britannia Fungicidal Wash Solution is a water-based solution which controls and treats fungal and algal growth prior to painting external hard services. Water based - Easy, quick and safe to use Powerful, proven water based solution for external hard surfaces Specially prepared fungicide controls and treats fungal and algal growth prior...

Price £15.77 (ex. VAT)
In Stock and Available for Delivery

Britannia Wallshield Pliolite

Britannia Wallshield Pliolite offers all-year protection, and is available in a range of aesthetically-pleasing colours which can be easily applied to many types of building substrates, even in cold temperatures (down to -5°C). Solvent-based for exterior walls Up to 15 years protection Allows all year around exterior decoration...

Price £46.12 (ex. VAT)
In Stock and Available for Delivery

Britannia Wallshield Eco

Britannia Wallshield Eco is a water-based eco-friendly exterior wall coating. It offers a long-lasting decorative finish that also protects and helps improve insulation. For use on concrete, brickwork, asbestos, cement and renderings, stone, pebbledash etc. Waterproof Contains algicide and fungicide Flexible and hardwearing Applied by...

Price £42.91 (ex. VAT)
In Stock and Available for Delivery