We no longer stock this product, but can recommend Bradite Low Slip Additive (LS30) as a great alternative.
Bradite SA12 Low Slip Aggregate is a polymer bead paint additive that is added to floor paint to create a low slip surface. This additive is particularly beneficial to wet areas, especially those that are exposed to bare skin contact.
Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Features & Benefits
- Stir directly into paint.
- Can be used with all Bradite coatings when used for floors in wet areas.
- Soft feel - ideal for under foot traction.
- Circa 0.1 mm particle size.
- Will stay suspended in the coating during application.
- Conforms with parts KU1 C/D and KF1 E/F of BS5493
- Cream in colour
Please consult the data sheets for the specific Bradite floor paint product for recommendations.
This additive may be incorporated into the paint by two alternative methods, depending upon the requirements of the end application. Direct incorporation provides for a more even appearance on large areas, whereas hand broadcast may be preferred for smaller sections such as the tread surface of steps.
Direct Incorporation Method: Bradite Low Slip Soft Aggregate SA12 should be added to the paint and mixed thoroughly just before use at a rate of 1x 250ml SA12 tin (110g) per 5L of paint.
Hand Broadcast Method: Bradite Low Slip Soft Aggregate SA12 should be scattered over the first coat while it is still wet at a rate of 0.2-0.5 kg/m². When dry, excess low slip additive should be brushed off before application of the final coat.
The end user and applicator must ensure that the finished floor is safe against slips in all likely usage conditions.
- Stir in to paint, mixing thoroughly to give an even finish.
Be the first to ask a question about this product!