We no longer stock this product, but can recommend Teamac Mordant Solution (T Wash) as a great alternative.
Bradite Pre-Treat Galvanised Steel is a mordent solution used as a pre-treatment for galvanised steel, to provide a key for all paint primers and finishes. Easy to use solution; clean up with water after use.
Manufactured under the auspices of an ISO 9001:2008 quality & ISO 14001:2004 environmental management systems.
Features & Benefits
- Acid base in water and water miscible solvents.
- Designed as a pre-treatment for galvanised steel.
- British gas reference BGC MO1.
- Department of Transport Item NO:155.
Galvanised steel surface should be cleaned & degreased using Bradite Degreaser TD39 or steam cleaning, before application of Bradite Mordent solution TM38. Apply evenly using a soft brush and allow approximately 20 minutes to react. Reaction progress is indicated with a colour change to an even dark grey or black.
After the reaction has taken place the surface should be thoroughly rinsed with clean water. Treated surface should then be allowed to thoroughly dry prior to all subsequent painting operations.
Brush: supplied ready for use.
Spraying: this product should not be sprayed under any circumstance.
Clean all equipment immediately after use with clean water for best results. Always refer to the Health and Safety sheet for the product before use, and observe the warning phrases on the label.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
- 20m2 per Litre
Be the first to ask a question about this product!