Envirograf Intumescent Non Fibrous Fire Stop Blocks
|Reference||Size in mm||Length||Fire Rating|
|SIB1||50mm thick x 150mm wide||1000mm||Up to 1 hour|
|SIB1/A||50mm thick x 100mm wide||1000mm||Up to 1 hour|
|SIB1/B||50mm thick x 50mm wide||1000mm||Up to 1 hour|
|SIB2||100mm thick x 150mm wide||1000mm||Up to 2 hours|
|SIB2/A||100mm thick x 100mm wide||1000mm||Up to 2 hours|
|SIB2/B||100mm thick x 50mm wide||1000mm||Up to 2 hours|
Special sizes can be made to order - contact our technical team on 0113 245 5450 for more information.
Use Envirograf Intumescent
The blocks are easy to cut to shape for fitting into areas and gaps around pipes and wires, using a sharp knife or hacksaw. Fit between screen walling and concrete floors as a firebreak.
Dust-free and clean fixing, the blocks are made of fireproof sponge and are easy to remove for maintenance or to install further services.
Seal multiple blocks together with the adhesive tape down both sides of the blocks. Intumescent material expands when exposed to fire, forming a seal against smoke and fire.
Advantages of Envirograf Intumescent
Non Fibrous Fire Stop Blocks
- Clean fixing
- Dust free
- Simple to install
- Can be removed to install other services
- Cut with a sharp knife
- Can be shaped around services openings
The Intumescent Blocks can be cut with a sharp knife or hacksaw blade, fitting into the opening to form a fire seal. Can be cut and pushed around services and pipes.
Where plastic pipes are 75mm or over then use Envirograf Wrap or Pipe Sleeve fixing into the blocks.
Where blocks are going over cable trays, leave a small gap and use Envirograf Product 29 Cable Tray Pillows.
The blocks have double-sided tape around the edges so they can be adhered to each other to form a smoke seal. Where there are any open joints use Envirograf Product 63 Intumescent Cement Filler.
Envirograf Intumescent Blocks can be used between screen walling and concrete floors as a firebreak.
The block is made from a
Multigraf Intumescent material chemical constitution
- Mineral Wool Fibre 20-70% by weight
- Exfoliating Graphite 20-60% by weight
- Organic Binder (including adhesive coating) 5.0-30% by weight
|Fulmer Yarsley - FT/ 10330.2||101 Minutes||7 Minutes|
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!