We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.
Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat protects walls and ceilings against normal humidity and contamination indoors.
Offers better protection against contamination than non-hygienic paint
Water-based
Multiple coatings in one day possible
Can be applied on damp surfaces
Technical Data
Density: 1.29
Gloss Level: Satin
Solids content in volume: 35 %
Heat Resistance: 90°C (dry heat)
Drying Times At 20°C/RH 50%
Touch dry: 30 min (20°C), 2 h (10°C), 30 min (30°C)
Dry to handle: 2 h (20°C), 4 h (10°C), 1 h (30°C)
Dry to recoat: 4 h (20°C), 6 h (10°C), 3 h (30°C)
Fully cured: 3 days (20°C), 5 days (10°C), 2 days (30°C)
Theoretical Consumption
9 m²/l
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure- (steam) cleaning in combination with appropriate detergents. New concrete, plaster or brick surfaces should cure and dry for at least 30 days prior to application of the coating. Repair surface defects. Remove contamination with RUST-OLEUM FK111 or ND14. Wash total surface with plenty of fresh/warm water or high pressure- (steam) cleaning in order to remove all remnants of contamination and cleaners. Remove deteriorated coatings by scraping and wire brushing. Sand intact coatings to roughen the surface slightly. The surface must be clean and may be slightly damp during application.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
8798.5
Data sheet
For Use By
Industrial Use
For Use By
Professional Use
Interior / Exterior Use
Interior
Interior / Exterior Use
Interior
Water / Solvent Based
Water
For Use On
Concrete, Plaster, Brickwork, Masonry
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 Hours
Dry to Recoat (at 20°C)
4 Hours
Fully Cured (at 20°C)
3 Days
Coverage
9m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Density
1,29
Solids by Volume
35%
Heat Resistance (up-to)
90 °C (dry heat)
VOC
30 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C. Protect from freezing.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum 8798 Hygienic Acrylic Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product, but can recommend Rust-Oleum 8300 Hygienic Topcoat as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on...
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical...
Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates.Non-flammable, virtually odour-free cleaning/degreasing solution. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge,...
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...