• Envirograf Intumescent Protection Sleeve System For Cables

Envirograf Intumescent Protection Sleeve System For Cables

Product 25

We no longer stock this product, but can recommend as our nearest alternatives:

Please contact our Technical Team on 0113 2455450 (option 2) or send a message to [email protected] prior to purchase/use for advice on suitability.




Ref Internal Sleeve Size External Sleeve Size Sleeve Length
ICP1/2 50mm 62mm 200mm
ICP2/2 90mm 102mm 200mm
ICP3/2 115mm 135mm 200mm
ICP4/2 165mm 187mm 200mm
ICP5/2 215mm 240mm 200mm
ICP1/6 50mm 62mm 600mm
ICP2/6 90mm 102mm 600mm
ICP3/6 115mm 135mm 600mm
ICP4/6 165mm 187mm 600mm
ICP5/6 215mm 240mm 600mm

The Envirograf Intumescent Protection Sleeve System For Cables unit can retrofit existing electrical and plumbing that passes through a fire barrier in walls and floors, protecting against fire and smoke spreading.

The intumescent tube is available in 2 different lengths and can be cut to fit the required depth between walls and floors. The tube can also be cut to fit around existing pipes and cables, adhered with the self-adhesive tag before being pushed into the wall. During a fire, the intumescent tube expands to seal off the gap to fire and smoke.

2 smoke protector units screw on either side of the hole to the substrate and have a fireproof sponge that can be cut to allow passage of services whilst sealing against smoke. These units come in 2 parts to fit around existing services easily.

Use the Envirograf Intumescent Protection Sleeve System to maintain the integrity of a fire barrier when services have to pass through, whether in a domestic home or commercial or industrial property.


A complete unit providing up to 130 minutes fire and smoke protection for electrical and plumbing services passing through fire barrier walls made from block, brick, concrete, and hollow plasterboard.


Part (A) semi-flexible tube is pushed into the hole for the services – cut to the right size to suit depth of wall or floor. Part (B) smoke protection unit is screwed to the face of the substrate either side of the hole where your services are to pass through. The units contain a fireproof sponge smoke seal which can be easily cut to allow cables etc. to pass through.

The Intumescent Protection Sleeve System can be fitted over existing services. The semi flexible tube can be cut and fitted around the cables etc. and adhered with the self-adhesive tag then pushed into the wall. The smoke protection units come in two parts and can be screwed around the exiting services either side of the opening.

Once the system is in place cables and services can be removed and replaced easily.

Material Specification:

Multigraf Intumescent material chemical constitution

  • Mineral Wool Fibre 20-70% by weight
  • Exfoliating Graphite 20-60% by weight
  • Organic Binder (including adhesive coating) 5.0-30% by weight

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 25

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields