Ennis-Flint Thermaline
  • Ennis-Flint Thermaline
  • Ennis-Flint Thermaline

Ennis-Flint Thermaline

ENN1006

We no longer stock this product, but can recommend Hitex HiFlex Preformed Thermoplastic Lines as a great alternative.

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Ennis-Flint Thermaline, a new preformed thermoplastic road marking, has been developed as part of the Ennis-Flint Thermoplastic products range. Thermaline compliments the road marking programme by its various uses and material makeup.

  • Ideal for areas with light traffic, such as playgrounds
  • It is an easy to apply, durable and cost effective product for markings on a variety of surfaces
  • Note: a minimum order quantity of 4 boxes applies to all sizes and colours

Quantity
Product not available
This Product has been Discontinued

Description

Ennis-Flint Thermaline is a durable, retro-reflective roadway marking material suitable for use as roadway, intersection, commercial or private surface delineation and markings.

Ennis-Flint Thermaline is a resilient white, yellow or other colour preformed thermoplastic product with uniformly distributed glass beads throughout the entire cross sectional area. The markings are resistant to the detrimental effects of motor fuels, lubricants, hydraulic fluids, antifreeze, etc. Lines, legends and symbols are capable of being affixed to bituminous and/or Portland cement concrete roadways by the use of the normal heat of a propane torch.

The markings are capable of conforming to roadway surface contours, breaks and faults through the action of traffic at normal roadway surface temperatures. The markings have resealing characteristics, such that it is capable of fusing with itself and previously applied thermoplastic when heated with the torch.

Features & Benefits

  • Flexible - lines are pliable and can be shaped easily
  • Available in white and yellow colours with special colours available on request
  • Inter-connected symbols
  • Available in 2.5mm thickness and is supplied in rolls
  • Material has sharp edges that allow for a neater finish when applied correctly
  • Good durability and colour stability during the heating process
  • Initial visibility can be created by post-sprinkling glass beads
  • Designed for parking bays, decorative spaces and limited traffic areas
  • Typical performance : 2-3 years
  • One year shelf life
  • Meets international standards including, but not limited to, EN 1790, EN 1871, EN 1436, AASHTO, and FHWA

Application

When applying the product drop-on material must be post sprinkled on the surface in order to meet initial performance.

Asphalt: The materials shall be applied using the propane torch method recommended by the manufacturer. The material must be able to be applied without minimum requirements for ambient and road temperatures and without any preheating of the roadway surface to a specific temperature. The material must be able to be applied without the use of a thermometer. The roadway shall be clean, dry and free of debris.

Portland Cement Concrete: The same application procedure shall be used as described above. However, a compatible primer sealer shall be applied before application to assure proper adhesion.

Thermaline Application

Product Details
ENN1006

Data sheet

Manufacturer
Ennis-Flint
Pack Size
5m x 50mm Roll (Box of 12)
5m x 100mm Roll (Box of 6)
Exterior / Interior Use
Exterior & Interior Use
Suitable For Use On
Concrete
Suitable For Use On
Asphalt
Components
1K
Colour Family
White
Colour Family
Yellow
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Ennis-Flint Thermaline is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT