OPEN AS USUAL DURING LOCKDOWN #3
Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
Coronavirus Updates - Open and Services as Normal (click for more info)
Unfortunately, we no longer stock this product. Thermoguard Flame Retardant WB Topcoat may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use.
Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your project and get 10% off.
Envirograf EP/FS/TCW Water-Based Top Coating for Steel, part of the Intumescent Coating for Steel & Aluminium Protection range. Gives internal extra fire protection, as well as non-exposed areas, with a hard and glossy finish for good resistance to weather.
With tall office buildings like The Shard, Maxim Office Park and Heron Tower becoming more popular in the non-residential market, quick and easy fire protection applications help these structures maintain their load bearing capacity during evacuations.
The cost advantages of steel-framed construction mean more schools, hospitals and council buildings are being built in this way, with multiple floors that have to be covered by fire sprinklers as well as fire protection coatings and systems.
Ensure that the surface of the steel is clean and dry and free from contaminants immediately prior to application.
Envirograf EP/FS/TCW can be applied using brush, roller or spray at a rate of 10 - 12m² per litre. Do not thin – use straight from the tin. However if applying by spray up to 10% water may be added. The coating is touch dry in two hours.
Clean tools and spillages with warm water. Keep containers tightly closed and protect from frost.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Unfortunately, we no longer stock this product. Thermoguard Steel Fire Paint Primer may be a great alternative to consider, however you must contact us to confirm suitability prior to purchase/use. Please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] to confirm suitability for your...
