We no longer stock this product, but can recommend as our nearest alternatives: Protecta FR Board Firetherm Intutec Batts Norseal Stopseal Fire Batts SikaSeal-626 Fire Board Please contact our Technical Team on 0113 2455450 (option 2) or send a message to [email protected] prior to purchase/use for advice on suitability....
Envirograf Fireproof Coating for Slabs
We no longer stock this product, but can recommend as our nearest alternatives:
- Protecta Service Coating FR-1
- Firetherm Intumastic Brush Grade
- Sikacryl-625 Fire Resistant Ablative Acrylic Coating
Envirograf Fireproof Coating for Slabs is a white, intumescent anti-fire coating for a fireproof slab (also referred to as a Fire Batt) used in a fire barrier, such as Envirograf Product 4 and Product 5, for extra fire protection. Water based, the anti-fire coating is solvent-free and can be applied to a fireproof slab with a brush or trowel.
Intumescent materials and anti-fire coatings expand when exposed to heat or attacked by fire, sealing gaps around them to prevent the spread of smoke and fire. By slowing the spread of fire, allowing more time for evacuation and for emergency services to arrive, damage to buildings and surroundings can be contained for limited downtime.
- Composition: Aqueous polymer system with inert and fire retardant fillers.
- Specific Gravity: 1.30
- Slump: No slump when applied as recommended.
- Skin Time: 1 hour, depending on room temperature and humidity.
- Cure Time: 3mm in 24 hours, depending on room temperature and humidity.
- Application temp: +5 to +40C
- Service temp: -20 to +80C
- Store between +5C to +30C.
- Protect from frost.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.
Be the first to ask a question about this product!
Intumescent Coated Non Fibrous Slabs fit inside walls, floors & ceilings to create a permanent fire barrier, compartmentalising a space to effectively slow and prevent the spread of fire. The fire slabs are ideal for where non-fibrous material is required, such as hospitals, computer rooms, & other sterile areas, with the anti-fire...