• Envirograf Door Threshold Ramps and Seals

Envirograf Door Threshold Ramps and Seals

Product 106

Unfortunately, we no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to offer you up to 10% off a suitable alternative product for your project.



For easy passing over from carpeted to non-carpeted areas, Envirograf Door Threshold Ramps and Seals are designed for wheelchair users.

Ordering references:

The system comprises of 2 components:

  • DT - Threshold Seal with Carpet Seal - DT is a curved ramp moulding containing a carpet pile threshold seal
  • DTE - Threshold Seal Extension - DTE is a curved ramp moulding without the carpet pile threshold seal to meet the carpeted moulding on the other side of the door threshold (or to be used independently to bridge the different levels of non-carpeted and carpeted floors)


  • 1050mm
  • 2100mm


  • Grey
  • Brown
  • Black

Screws are included for fixing.


Both sections DT and DTE are fixed into position with screws.

DT: Remove the carpet section, drill and screw the seal into position and clip the carpet back into the
holder unit.

DTE: Fix in place with screws.

Fixing screws are included.

Application of flexible mastic sealant to the underside of the mouldings ensures a water-tight seal. When used in combination with other Envirograf seals on the door, the Envirograf® DT/DTE seal set offers acoustic, draught and weather protection in situations where a threshold seal is required on a flat surface, particularly where there is no weather bar. In situations where a draught and weather seal is needed for an exterior door, only one section is used in conjunction with an Envirograf® door seal. The seal is suitable for internal or external use. The seals are not affected by sea air or water.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and ConditionsWe will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Any Envirograf products to be used in or for Harrods department store should be authorised with our Technical Team prior to purchase.

Product Details
Product 106

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Be the first to ask a question about this product!

Question about the product

* Required fields