Call 0113 245 5450 for Sales or Technical
Alternatively you can email our sales & support team on [email protected]
We no longer stock this product, but can recommend Nu-Guard AG as a great alternative.
Graffiti Magic Clear Anti-Graffiti Coating is a quick-drying, anti-graffiti paint which protects suitable substrates against graffiti of all kinds and can be cleaned repeatedly without special chemicals. Its an easily applied, single pack, clear coating available in gloss or matt finish, giving excellent adhesion to recommended substrates. Short drying and re-coating times mean rapid graffiti protection of all kinds can be achieved.
Graffiti Magic Clear Anti-Graffiti Coating can be applied to vulnerable exterior surfaces including concrete, brick, stone, render, timber, metal, cladding and most sound previously painted surfaces. As Graffiti Magic Clear Anti-Graffiti Coating preserves the substrate in the condition in which it is treated, cleaning and/or re-decoration must take place before treatment.
Features & Benefits
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Mark on 12/02/2018 |
Question: Can this coating be removed. I have a client that’s had this applied and now asking for it to be removed. Not sure why they need it removing. The customer is always right! Thanks |
Answer: Graffiti Magic Clear Anti-Graffiti Coating can be removed by basting i.e. chalk or glass bead. This is the only way to clear ALL Graffiti Magic off a surface if it is on a solid substrate. Using sand or grit is too severe and will possibly damage the substrate under Graffiti Magic. Graffiti Magic can be overcoated by Zinsser B-I-N primer and then decorated over, this will adhere to the surface but will result in reduced overall performance of the system. | |
| Libby Rutherford on 14/03/2017 |
Question: We have an area of newly stained timber cladding in a public area. Is the Graffiti Magic clear coating suitable for this? Would it darken the stain? We'd probably prefer matt, would that be suitable. Thanks. |
Answer: Graffiti Magic Clear Anti-Graffiti Coating is suitable to be applied over certain wood stains but not varnish. Like most clear coatings Graffiti Magic will darken the appearance of the timber to a degree. We would suggest you carry out a test area prior to full application to ensure compatibility, appearance and performance is acceptable. | |
| Jerome on 05/03/2017 |
Question: Hello, can this be used on interior walls, e.g. school hallways?
Need a matt coating that is exceptionally hardwearing & easy cleanable for interior use. |
Answer: No Graffiti Magic Clear Anti-Graffiti Coating is not suitable for interior use, instead for interior projects we recommend Rust-Oleum GraffitiShield Polycoat. It is available in a clear, matt finish, is low odour, solvent free and only requires one coat making it very cost effective and safe to use. | |
| sarah hoskins on 25/10/2016 |
Question: Following an attack of graffiti on lime painted stone wall of the local church, the graffiti has been removed with scrubbing. Can we now paint over the lime paint on the cleaned stone walls with your anti graffiti paint? Churchwarden St Mary's Moulsoe |
Answer: We recommend lime wash surfaces are first primed with a coat of Graffiti Magic Non-Darkening Sealer, before application of Graffiti Magic Clear Anti-Graffiti Coating. | |
| sarah hoskins on 25/10/2016 |
Question: Following an attack of graffiti on lime painted stone wall of the local church, the graffiti has been removed with scrubbing. Can we now paint over the lime paint on the cleaned stone walls with your anti graffiti paint? Churchwarden St Mary's Moulsoe |
Answer: We recommend lime wash surfaces are first primed with a coat of Graffiti Magic Non-Darkening Sealer, before application of Graffiti Magic Clear Anti-Graffiti Coating. | |
| alan on 05/10/2016 |
Question: i have a client who needs a graffiti coating on the walls of decorative posters.
can we apply this coating on posters on plastered wall?
would the chemicals in this be too abrasive for the paper on the walls ? |
Answer: Providing the wall is sealed behind the posters Graffiti Magic Clear Anti-Graffiti Coating should be OK for this use but we would recommend a test area is carried out prior to full application to check for adhesion, compatibility and appearance. | |
| John Armstrong on 30/08/2016 |
Question: I have large timber gates do they need to be treated before applying the anti graffiti paint. |
Answer: Graffiti Magic Clear Anti-Graffiti Coating can be applied directly to bare timber but will require multiple coats (usually 3-4) to build up the film build on the surface. | |
| Jenny on 31/07/2016 |
Question: I have an exterior painted brick wall, it has been painted with exterior weather shield masonry paint (white). Is this product suitable for protecting it from graffiti with marker pen? |
Answer: Yes, you can apply two coats of Graffiti Magic Clear Anti-Graffiti Coating directly over the dried masonry paint at a coverage rate of 8m² per litre/per coat. | |
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
We no longer stock this product, but can recommend Axalta ViterClad PV Finish as a great alternative.
We no longer stock this product, but can recommend Sherwin-Williams Kem-Kromik 155 as a great alternative.
We no longer stock this product, but can recommend Envirograf Intumescent Fire & Smoke Stop Pillows as a great alternative.
We no longer stock this product, but can recommend RSL Resubind CP as a great alternative.
We no longer stock this product, but can recommend Nullifire S606 Solvent-Based Intumescent Coating as our nearest alternative. Please contact our Technical Team on 0113 2455450 (option 2) or send a message to [email protected] prior to purchase/use for advice on suitability.
We no longer stock this product; contact our technical team on 0113 2455450 or [email protected] for a recommended alternative..
We no longer stock this product, but can recommend Axalta ViterThane PLS Recoatable PU Finish as a great alternative.
We no longer stock this product, but can recommend Everbuild Tecnic Joint Backer Rod as a great alternative.
We no longer stock this product - please contact our technical team on 0113 2455450 (option 2) or [email protected] to discuss a suitable alternative.
We no longer stock this product, but can recommend Heskins Edge Fix as a great alternative.
We no longer stock this product, but can recommend Heskins H3508 Surface Cleaner/Degreaser as a great alternative.
We no longer stock this product, but can recommend Remmers Compound Mortar as a great alternative.
Unfortunately we no longer stock this product.
We no longer stock this item.You can find other decorative aerosol topcoats, here.
We no longer stock this product, but can recommend Britannia Anti-Vandal Paint as a great alternative.
