

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
Carboline Carboguard 888 MIO is a low temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish coat on to steel. Carboguard 888 MIO has the benefit of self-priming on steel, galvanized steel and concrete, and offers user-friendly characteristics which facilitate application in a wide range of environmental conditions.
Surfaces must be clean and dry. Emply adequate methods to remove dirt, dust, oil and all other contaminants that could interfere with adhesion of the coating.
Steel
SSP-SP6 / ISO 8501-1 SA2. Surface profile: 38-75um (1.5-3mils)
Galvanized Steel
SSPC-SP1 - SSPC-SP7
Concrete
Concrete must be cured 28 days at 24C (75F) and RH 50% or equivalent. Laitance, form oils, curing agents and hardeners should be removed by suitable method before coating application.
Mixing & Thinning
Power mix separately, then combine and power mix. DO NOT MIX PARTIAL KITS.
May be thinned up to 15% with Thinner 15. Use of thinners other than those supplied or recommended by Carboline may adversely affect product performance and void product warranty, whether expressed or implied.
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.