PPG Thinner 21-06
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product.
PPG SteelGuard 564 is a one-component, thin-film, solvent-borne intumescent coating for fire protection of structural steelwork. Steelguard 564 is fast-drying and provides up to 120 minutes protection from cellulosic fires.
Basic data at 20°C (68°F)
Data for Product | |||||
---|---|---|---|---|---|
Number of components | One | ||||
Mass density | 1.34 kg/l (11.18 lb/US gal) | ||||
Volume solids | 75 ± 3% | ||||
VOC (Supplied) | Directive 1999/13/EC, SED: max. 255.0 g/kg UK PG 6/23(92) Appendix 3: max. 327.0 g/l (approx. 2.7 lb/US gal) EUR Directive: 2004/42/IIA(i)(500) 367 g/l) | ||||
Recommended film thickness | 200 - 1000 µm (8.0 - 40.0 mils) per coat | ||||
Theoretical spreading rate | 1.07 m²/l for 700 µm (43 ft²/US gal for 28.0 mils) | ||||
Dry to touch | 20 minutes | ||||
Overcoating interval | Minimum: 4 hours Maximum: Unlimited | ||||
Shelf life | At least 18 months when stored cool and dry |
Notes:
See ADDITIONAL DATA – Spreading rate and film thickness
See ADDITIONAL DATA – Overcoating intervals
See ADDITIONAL DATA – Curing time
The required dry film thickness must be in accordance with the approval certification.
Recommended Substrate Conditions and Temperatures
Instructions for Use
Airless spray
Recommended thinner: THINNER 21-06 (normally no thinner required)
Volume of thinner: 0 - 5%
Nozzle angle: 20° – 50°, depending on shape of steel parts
Nozzle orifice: Approx. 0.48 – 0.64 mm (0.019 – 0.025 in)
Nozzle pressure: 20.0 MPa (approx. 200 bar; 2901 p.s.i.)
Notes:
All filters, including surge bottle and gun filters to be removed. External fluid uptake pipe filter is recommended
Brush/roller
For small areas only (touch up and repair). No thinner should be added.
Cleaning Solvent
THINNER 21-06
Overcoating interval for DFT up to 700 µm (28 mils) | ||||||
---|---|---|---|---|---|---|
Overcoating with... | Interval | 5°C (41°F) | 10°C (50°F) | 15°C (59°F) | 20°C (68°F) | 30°C (86°F) |
Itself | Minimum Maximum | 10 hours Unlimited | 8 hours Unlimited | 6 hours Unlimited | 4 hours Unlimited | 3 hours Unlimited |
Overcoating interval for DFT up to 1000 µm (40 mils) | ||||||
---|---|---|---|---|---|---|
Overcoating with... | Interval | 5°C (41°F) | 10°C (50°F) | 15°C (59°F) | 20°C (68°F) | 30°C (86°F) |
Steelguard 2458 | Minimum Maximum | 2 hours Unlimited | 1.5 hours Unlimited | 1 hour Unlimited | 30 minutes Unlimited | 20 minutes Unlimited |
Other approved coats | Minimum Maximum | 3 days Unlimited | 60 hours Unlimited | 48 hours Unlimited | 24 hours Unlimited | 16 hours Unlimited |
Curing time for DFT up to 25 µm (1.0 mils) | ||
---|---|---|
Substrate Temp. | Dry to Touch | |
5°C (41°F) | 1 hour | |
10°C (50°F) | 45 minutes | |
15°C (59°F) | 30 minutes | |
20°C (68°F) | 20 minutes | |
30°C (86°F) | 10 minutes |
Note: Drying times may vary considerably depending on ambient conditions, A/V m⁻¹ (Hp/A) of section and applied film thickness.
References
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
PPG SteelGuard 564 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info