Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Rust-Oleum 7100 Floor Coating is a 5L, quick drying, solvent-based, Alkyd gloss floor paint designed for use on interior and exterior concrete over 2 years old.
1,800+ colours from RAL, British Standard, and NCS
Rust-Oleum 7100 Floor Coating is an easy to apply solvent based Alkyd floor coating specially designed for applying on old (>2 years), dry concrete for interior and exterior use. Rust-Oleum 7100 Gloss Floor Coating has a good resistance against abrasion and neutral detergents (no alkaline cleaning agents) and is resistant during short contact periods against lubricating oils, fuel, petrol etc.
Price Band
Colours
Sizes Available
Price Band 1
RAL, BS, NCS colours
2.5L, 5L
Price Band 2
Reseda green
5L
Price Band 2
Moss green
5L
Price Band 3
Transparent
5L
Price Band 3
Traffic blue
5L
Price Band 3
Light ivory
5L
Price Band 3
Jet black
5L
Price Band 3
Pure white
5L
Price Band 4
Light grey
5L, 20L
Price Band 4
Silver grey
5L, 20L
Price Band 4
English red
5L, 20L
Price Band 5
Traffic yellow
2.5L, 5L
Recommended Uses
Wood surfaces
Concrete over 2 years old
On old, good adhering coatings
Metal floors that have been primed
Do NOT apply on smooth/dense concrete that contains a damp-repellent additive.
Technical Data
Density: 1,0 - 1,1 kg/l
Gloss Level: Gloss
Solids content in volume: 36 - 40 %
Drying Times At 20°C/RH 50%
Touch dry: 6 hours
Dry to recoat: 24 hours
Fully cured: 1 week
Theoretical Consumption
8,0 m²/l at 50 µm dry
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Rust-Oleum 7100 Floor Coating is available in two versions, standard and anti-slip (Rust-Oleum 7100NS Anti-Slip Floor Coating). Rust-Oleum 7100 Floor Coating can also be applied on old good adhering coatings and onto metal floors which have been correctly prepared and primed with a suitable Rust-Oleum metal primer.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
7142.2.5
Data sheet
Interior / Exterior Use
Interior and Exterior
Water / Solvent Based
Solvent
For Use On
Metal, Wood
Application Method
Brush, Roller
Sheen
Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
2.5L, 5L
Application
Brush, Roller
Dry to Recoat (at 20°C)
24 Hours
Fully Cured (at 20°C)
1 Week
Coverage
8m² per litre
Density
1,0 - 1,1 kg/l
Solids by Volume
36 - 40 %
VOC
456 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Can I cover concrete print As I no longer like colour
Answer from Rawlins’ Technical Team:
Rust-Oleum 7100 Floor Coating should be OK to be applied to this kind of surface, but if usage will include parked cars and therefore the possibility of hot tyre pick up, we would only say yes with a thorough grind of the surface beforehand.
Fran Holland on 2018-10-14 11:47:07
Question:
Can this be used outdoors to paint concrete patio slabs? Thanks
Answer from Rawlins’ Technical Team:
Technically yes, but we would recommend Rust-Oleum Tarmacoat as a more suited product for this type of application.
Jackie on 2018-08-24 00:46:39
Question:
Could I use this product on a concrete kitchen work surfacethat has been sealed?
Rust-Oleum 7100 Floor Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Rust-Oleum 7100NS Anti-Slip Floor Coating is an easy to apply, solvent based anti-slip floor coating:
For foot traffic, interior and exterior
Anti-slip additive is premixed in the coating
For use on old concrete (>2 yrs), metal and wood
Unique uniform appearance, high gloss
Touch dry: 6 hours, coverage: 8m² per litre
Available in...
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.
Each kit contains:
12" Roller,...