We no longer stock this product, but have Rust-Oleum Mathys Noxyde - 5KG colours in clearance, for immediate dispatch!
Rust-Oleum Mathys Noxyde is a water-based, single-component paint, designed for easy spray application and yet gives the same protection as a complicated and more expensive polyurethane systems. Rust-Oleum Mathys Noxyde forms a thick anticorrosive membrane that offers excellent protection against water, salt spray and aggressive environments. Independent research as per the ISO 12944 standard demonstrates that Noxyde is the absolute BEST in corrosive protection - it even offers more than 20 years of protection in the highest corrosion class C5-M.
Rust-Oleum Mathys Noxyde combines flexibility, strong adhesion, water resistance, excellent edge coverage and anti-corrosive pigments while requiring minimal surface preparation. Rust-Oleum Mathys Noxyde is a single pack water-based elastic coating ideal for use on metal cladding, metal roofs, bridges, silos, electrical isolation and more made from iron, steel, copper, aluminium, plastisol, zinc, lead, galvanised metal and PVDF (with a special primer).
* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.
30 years track record!
Noxyde has been tested by many institutes and the results are phenomenal with reports of “unsurpassed corrosion control”. Since 1972, it has been applied all over the world in many different climates, from very hot and dry to humid, rural-coastal, onshore and offshore... No impact upon the product's effectiveness was recorded, therefore it is the number one choice for metal protection. See Project References in the "Attachments" section above for details of Noxyde used on the Golden Gate Bridge in San Francisco, and storage tanks in Rotterdam harbour.
Rust-Oleum Mathys Noxyde is a premium, state-of-the-art, easy-to-use product ideal for long-term corrosion protection of metal surfaces. Its unique formulation performs like no other coating on the market and offers unsurpassed rust protection with minimal labour. It is an excellent over coating and alternative to sandblasting, a more economical solution to epoxy/polyurethane coatings.
* All guarantees are subject to approval by our Technical Department prior to purchase and/or use.
| TECHNICAL DATA | |
|---|---|
| Density: | 1,2 - 1,3 |
| Gloss Level: | Satin |
| Gloss level at 60º: | 20.00% |
| Corrosion Class: | C5 very high protection |
| Solids content in volume: | 55 % ± 3 % |
| Solids Content in weight: | 62 % ± 3 % |
| DRYING TIMES AT 20°C/RH 50% | |
|---|---|
| Touch dry: | 1,5 hours |
| Dry to handle: | 3 hours |
| Dry to recoat: | 24 hours |
| Fully cured: | 2 weeks |
Recommended Wet Film Thickness
320 μm
Recommended Dry Film Thickness
175 μm
| THEORETICAL CONSUMPTION | |
|---|---|
| Brush/roller: | 200 - 300 g/m²/coat |
| Airless: | 300 - 500 g/m²/coat |
| Total consumption for optimal rust preventive protection: | 800 g/m² = 350 μm dry film thickness |
Practical Consumption
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
Surface Preparation
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers.
Directions For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
Application Conditions
Temperature between 8 and 55°C / Air humidity max. 80% R.H.
The substrate temperature must be at least 5°C above dew point.
Application & Thinning For Brush Applications
Undiluted as a rust preventive paint.
Diluted with approximately 25% volume water as an adhesion primer (consumption about 100 g/m²).
Application & Thinning For Roller Applications
Undiluted as a rust preventive paint. Diluted with approximately 25% volume water as an adhesion primer (consumption about 100 g/m²)
Application & Thinning For Airless Spray Applications
Undiluted. Nozzle: 13 - 17 / Pressure: min. 170 bars. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator.
Cleaning of Equipment & Spills
Water
Notes
When used for interior works, provide for adequate ventilation.During work stoppage, fully immerse brush or nozzle in water. Product is recoatable after 24 hours with itself, Coating PRT, high gloss alkyd enamels, high and satin gloss acrylic dispersion paints.
| SAFETY DATA | |
|---|---|
| VOC level: | 15 g/l |
| VOC readymix: | 15 g/l |
| VOC category: | A/i |
| VOC limit: | 140 g/l |
| Grenelle: | Exterior |
| Flashpoint: | Not flammable |
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
 Philip rawson on 2021-12-13 20:01:08 | Question: I have a park home 40x20 and the metal frames have rusted on them.Is there a product that will just spray direct on the rust as I’m 76yrs I don’t think I could manage to go under twice.thank you. |
Answer from Rawlins’ Technical Team: This product is suitable for airless spray application, but any rust must be removed and the surface of the metal prepared as detailed in the technical data sheet prior to application of a minimum of 2 coats of the paint. This paint is suitable for application at temperatures done to 8°C minimum, if you are looking to paint this structure over the winter you could consider the solvent based version which is suitable for application down to 0°C called Rust-Oleum Mathys Noxyde Pegarust. | |
| Alan Robinson on 2019-05-19 12:33:46 | Question: Hi there. Would this require an airless spraygun? Thank you. |
Answer from Rawlins’ Technical Team: Yes, apply undiluted using a 13 - 17 Nozzle / Pressure: min. 170 bars. Nozzle and pressure can vary depending on the type of substrate, equipment and the experience of the applicator. | |
| Debbie Scarrow on 2019-01-02 15:23:06 | Question: Is Noxyd suitable for painting over existing Durbar chequerplate (walkway floorplate) and steel joists - presumed original painted with Red Oxide Primer around 40 years ago. What preparation would be necessary? Do you carry out paint analysis on existing decorations to ensure compatibility? Thank you. |
Answer from Rawlins’ Technical Team: Rust-Oleum Mathys Noxyde cannot be used as a floor coating so for the chequer plate we would suggest something like Rust-Oleum 9200 Rust-O-Thane instead. Rust-Oleum Mathys Noxyde should be fine for the steel joists assuming these aren't walked on. Paint analysis normally wouldn't be required for Noxyde but we do recommend a test area is carried out prior to full application to ensure compatibility, adhesion, appearance, etc. If you would like to provide some more information about the project and your requirements we can be more specific or arrange a site visit if necessary. | |
| Rhia Brown on 2018-12-28 22:39:29 | Question: Hi is there a product I can use on the Noxyde to make it a gloss finish? Many Thanks |
Answer from Rawlins’ Technical Team: Rust-Oleum Mathys Noxyde is recoatable after 24 hours with itself, Coating PRT, high gloss alkyd enamels, high and satin gloss acrylic dispersion paints. Alternatively you could instead use Rust-Oleum Pegarust instead of Noxyde if this is an option as this comes in a gloss finish as standard. | |
| Michael on 2018-12-21 19:31:56 | Question: Would this be suitable for painting a shipping container |
Answer from Rawlins’ Technical Team: Yes. | |
| Ste kempster on 2018-12-03 12:25:50 | Question: Hi can you mix colours as I need some colours that aren't on the colour list. As they are for a nursery I need pink blue and green which are colours on their signage. Also what area does the 20kg tins cover for a spray application. Many thanks ste |
Answer from Rawlins’ Technical Team: Rust-Oleum Mathys Noxyde is only available in the standard colours shown unless you require more than 100kg of each colour at which point it can be manufactured to most RAL and BS colours on a 2 - 3 week lead time. Rust-Oleum Mathys Metal Cladding Primer and Rust-Oleum Mathys Metal Cladding Topcoat may be of interest for your project and can be mixed individually to most RAL, BS, NCS and bespoke colours. | |
| Darren Kent on 2018-07-13 12:15:01 | Question: Hello, is this product suitable for painting a steel pick up bed on a 4x4 & what type of finish i.e gloss, matt, satin etc. Kind regards Darren |
Answer from Rawlins’ Technical Team: No, we would instead recommend Smartkote Protectakote UVR for this application. | |
| Keith porter on 2017-03-04 10:44:50 | Question: Is your Noxyde paint suitable for use on acid primed aluminium greenhouse ? |
Answer from Rawlins’ Technical Team: By 'acid prime' we are assuming you've used some sort of single pack, acid etch primer. We'd need a copy of the Technical Data sheet to confirm potential compatibility but subject to it being acceptable Rust-Oleum Mathys Noxyde is designed for airless spray application, if you intend to apply by brush or roller then Rust-Oleum Mathys Noxyde Peganox would be more suited. | |
| Philip whitehouse on 2017-01-28 10:14:47 | Question: Can rust oleum mathys noxyde paint be used to paint a metal narrow boat below the water line .many thanks for any information on this request... |
Answer from Rawlins’ Technical Team: No, Rust-Oleum Mathys Noxyde would definitely not be suitable for this, please call our Technical Department on 0113 2455450 for suitable options. | |
| Debbie C on 2016-09-12 11:17:12 | Question: Can this be painted onto Plastisol coating on roof cladding? |
Answer from Rawlins’ Technical Team: Yes, Rust-Oleum Mathys Noxyde is ideally suited to this application. It can be applied directly to correctly cleaned and preparated Plastisol Colorcoat HP200 and HPS200 Metal Cladding. HP200 is easily recognised by its classic ‘leathery’ surface texture and has been available since 1987, HPS200 has been available from 1998 and has a ‘dimpled’ surface texture and looks quite different from the traditional ‘leathergrain’ Plastisol. Other metal cladding types such as PVDF, PVF2, Polyester, Polyurethane, Power Coating, etc. require special consideration and in most instances will require a primer coat prior to applicaiton. These surfaces are usually easily recognisable by their ‘smooth’ appearance, however due to the nature of these cladding types we ALWAYS recommend our Technical Department is consulted for advice prior to commencement of works. | |
| Jenny Smith on 2016-06-19 11:08:20 | Question: We have gates which have some rust and have previously been painted with Hammerite. Can we use this paint sprayed directly onto the (cleaned) prepainted and rusty surfaces? |
Answer from Rawlins’ Technical Team: Yes, as long as you prepare the surface to remove any loose and flaking paint and rust, Rust-Oleum Mathys Noxyde can be applied directly. Surface Preparation should be as follows; Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On new galvanised surfaces, new zinc, aluminium, stainless steel, apply first a coat of Rust-Oleum Mathys Pegalink Universal Adhesion Primer. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers. | |
Rust-Oleum Mathys Noxyde is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
We no longer stock this product, but can recommend Zinsser Allcoat Exterior Satin Water Based as a great alternative - **Please Note: This alternative is not recommended for use over Rust-Oleum Mathys Noxyde** Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in...
We no longer stock this product, but can recommend Zinsser Allcoat Exterior Matt Water Based as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical...
Rust-Oleum 7500 Alkythane is a single pack high performance, anti-corrosion topcoat for metal. Ideal for low temperatures (as low as 5°C) it offers the same protection in less layers than other alkyd-systems.Easy to apply, excellent flow and aspect Extra durable because of polyurethane addition Available in 4,400+ colours, inc. RAL, RAL...
£111.26 (incl. VAT)
£92.72 (ex. VAT)
We no longer stock this product, but can recommend Rust-Oleum Mathys Noxyde Tape as a great alternative.
Rust-Oleum Mathys Metal Cladding Topcoat is a long lasting water based, semi-gloss acrylic paint specially designed for use as a finish on exterior metal cladding that has high filling and hiding power and features excellent flow out with high durability and colour and gloss stability.Available in 4,400+ colours, inc. RAL, RAL Design, BS,...
£168.11 (incl. VAT)
£140.09 (ex. VAT)
General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...
£12.04 (incl. VAT)
£10.03 (ex. VAT)
A self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene used for reinforcement of overlaps of metal cladding roof and wall panels in combination with the Noxyde coating system. Easy to apply Excellent adhesive properties, even at low temperatures Excellent heat stability High plasticity and...
£47.36 (incl. VAT)
£39.47 (ex. VAT)
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
£25.84 (incl. VAT)
£21.53 (ex. VAT)
