• Blackfriar Oil Tolerant Primer

Blackfriar Professional Oil Tolerant Primer

BF2090004

We no longer stock this product, but can recommend Coo-Var Oil Tolerant Primer as a great alternative.

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Blackfriar Professional Oil Tolerant Primer is a specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with with Blackfriar Professional High Traffic Floor Paint.

Product Details

  • Designed for use over cleaned concrete floors and screeds.
  • Tolerates all types of residual oil contamination.
  • Can also be applied to new, fully cured concrete.
  • Indoor and outdoor use.

£0.00(ex. VAT)
£0.00 (inc. VAT)
Quantity
Product not available
Temporarily Out of Stock

Description

Blackfriar Professional Oil Tolerant Primer is a specialist primer for surfaces with residual oil contamination. Ideal for concrete floors and screeds, promotes adhesion prior to coating with with Blackfriar Professional High Traffic Floor Paint.

Preparation

Ensure the surface to be painted is integrally sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm surface. Special attention should be given to areas under cars to ensure all oil, grease, dirt and road salt is removed.

Application

Stir base thoroughly before adding all of the activator then mix well. DO NOT MIX PART UNITS. Discharge immediately after mixing. Pot life is 20-30 minutes at 20°C. Apply with a brush, squeegee or roller working the paint in any surface imperfections. If necessary de-aerate using a spiked roller within 20 minutes of application. Reasonably low profiled surfaces can usually be treated with one full coat of Blackfriar Professional Oil Tolerant Primer applied a 5m²/L. Porous or uneven surfaces will require more material.

Rough or undulating surfaces should receive at least two coats of Blackfriar Professional Oil Tolerant Primer to ensure high spots are fully protected. Do not apply at surface temperatures below 10°C or if overnight ambient temperatures are below 5°C.

Drying Time

6-16hrs @20°C. Allow to dry for a minimum of 16hrs @20°C and maximum 48 hrs @20°C between coats. Full cure is achieved in 5-7 days @20°C.

Clean Up

Small spillages can be cleaned up with Xylene. Allow brushes and rollers to cure and dispose of. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings.

Product Details

  • Designed for use over cleaned concrete floors and screeds.
  • Tolerates all types of residual oil contamination.
  • Can also be applied to new, fully cured concrete.
  • Indoor and outdoor use.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details
BF2090004

Data sheet

Manufacturer
Blackfriar Professional
For Use On
Concrete
Application Method
Brush, Squeegee, Roller
Colour
Clear
Single, Two or Three Pack
Single
Pack Size
5L
Parts
Two
Base Type
Solvent Based
Interior/Exterior Use
Interior and Exterior
Application
Roller
Pot Life (at 20°C)
20-30 minutes
Coverage
5m² per litre
Touch Dry
6-16 Hours
UN Number (Activator)
UN3470
UN Number (Base)
UN3082
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


Be the first to ask a question about this product!


Question about the product

* Required fields
(read)
Send

IMPORTANT SHIPPING & DELIVERY INFORMATION

Blackfriar Professional Oil Tolerant Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like

Blackfriar Professional High Traffic Floor Paint

Blackfriar Professional High Traffic Floor Paint is an exceptionally hard-wearing, high performance, easy-to-clean 2-pack solvent based floor coating ideal for indoor and outdoor use. Provides outstanding resistance to a wide range of chemicals, non-yellowing, excellent colour fastness. Resists grease, oil and solutions of acid and alkali...

Price £96.83 (ex. VAT)
In Stock and Available for Delivery

Floor Application Kit

Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...

Price £75.24 (ex. VAT)
In Stock and Available for Delivery