Promat Promaseal Pipewrap consists of a water-resistant sleeve around a flexible intumescent core, used to prevent the passage of smoke, toxic gases and fire through gaps in compartment walls and floors caused by the collapse and/or melting of combustible services in the event of fire.
It maintains the fire resistance of walls and floors when they are penetrated by combustible pipework such as PVC drainage pipes and can also be used around groups of cables.
General:
Promat Promaseal Pipewrap is always installed into a prepared opening within floors or walls. Promat Promaseal Pipewrap is wrapped around the pipe to be protected and secured tightly in position by means of the adhesive tab. It is then slid along the pipe until it is contained within the prepared opening, and grouted into position using Promat Promaseal Fire Compound or Promat Promaseal Intumescent Acrylic Sealant.
A single Promaseal Pipewrap should be fixed in the anticipated fire side of the wall or floor. Any cavity around the Promaseal Pipewrap should be filled with Promat Promaseal Fire Compound.
When there is a risk of fire from both sides two wraps should be used to allow the intumescent material to be flush with each face of the wall or floor. Please see the Product Data Sheet for further information.
Benefits:
Water resistant sleeve around a flexible intumescent core
Maintains the fire resistance of walls and floors when penetrated by combustible pipework
Can also be used around groups of cables
Prevents the passage of smoke, toxic gases and fire
Please contact Rawlins Paints Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contactedto obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditionsand should be applied only by an individual with the necessary expertise and experience.We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Promat Promaseal Pipewrap is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
We no longer stock this product, but can recommend FSi Pyrocoustic Fire Resistant Sealant as a great alternative. Promat Promaseal Intumescent Acrylic Sealant is a fire stopping sealant for walls and floors, used to seal joints up to 50mm wide and for sealing around services. Allows for ± 10% movement. Available in 310ml tubes.Tested to...
We no longer stock this product, but can recommend FSi Silverseal HS Compound as a great alternative. Promat Promaseal Fire Compound - Extra Strength is a gypsum cement, high strength firestopping compound used to fill openings in rigid walls and floors for the passage of services.Up to 240 minutes fire resistance for walls and floors...