We no longer stock this product; our technical team recommend RSL Epo-Flex FX as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. It should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. The coating offers protection against abrasion and impact and can be applied up to 2mm thick in just one coat.
Very flexible self-leveller, very wear- and impact-resistant
High build and durable coating
Good chemical and wear resistance
Available in 850+ colours
Product customisation
Don't forget to save your customization to be able to add to cart
Rust-Oleum B95SL Flexible Self Levelling Epoxy is a virtually solvent free, two component epoxy flooring system, with a convenient 1:1 mixing ratio. Rust-Oleum B95SL Flexible Self Levelling Epoxy should be used on cleaned, horizontal concrete, asphalt-concrete, or other floors where flexibility is required. It can also be applied on cleaned, well adhering old epoxy floor coatings. The coating offers protection against abrasion and impact and can be applied in a dry film thickness of 150-200μm (roller) or up to 2mm (rake) in one coat. If good U.V. and chemical resistance is required, Rust-Oleum 9600 Rust-O-Thane Polyurethane or Rust-Oleum 9200 Rust-O-Thane should be applied (except for 9211 or 9610 clear).
Features & Benefits
High build, wear and impact resistant
Self levelling for uneven surfaces
Good chemical resistance
Wide colour range
Surface Preparation General: remove oil, grease and all other surface contamination by alkaline or (high pressure) steam cleaning. The surface should be clean and dry during application. Previously coated surfaces must be in sound condition and should be roughened in order to achieve optimal adhesion. A test-patch is recommended to check compatibility.
Concrete: new concrete should cure and dry for at least 30 days prior to the application of the product. Concrete curing compounds should be removed completely. All laitance, loose or unsound concrete should be removed by vacuum blasting or etching with Rust-Oleum Mathys 108 Surfa Etch Solution. Irregularities should be levelled with Rust-Oleum 5170 Scrape Coat. Defects in the concrete should be repaired with Rust-Oleum 5180 Epoxy Repair Mortar directly after having primed with Rust-Oleum 5401 Epoxy Impregnation Primer (wet into wet). For details see the Product Data Sheets. Very porous concrete should be primed with Rust-Oleum 5401 Epoxy Impregnation Primer.
Asphalt-concrete: New asphalt-concrete should cure and dry for at least 60 days prior to the application of the product. Defects in the surface should be repaired with the Rust-Oleum B95SL Flexible Self Levelling Epoxy, with fire-dried quartz sand mixed into a ratio of approx. 1:1 in volume.
Directions for Use Stir individual components thoroughly before mixing them together. Use the boxing method or low speed mixer.
Application Conditions Temperature of air and substrate between 10 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
Remarks Maximum dry film thickness per coat: 2mm dry, equals 2mm wet. Check coverage regularly during application. Food should be stored separately or covered adequately during application of the coating. Some chemicals and solvents may cause discoloration and can affect the coating. The floor should be horizontal (max. 3mm per metre incline, according to DIN 18 202, Table 3, Column 4) before applying the material in order to avoid excessive differences in dry film thickness. Expansion joints should be filled with a flexible sealant. Rust-Oleum B95SL Flexible Self Levelling Epoxy should always be top coated with Rust-Oleum 9600 Rust-O-Thane Polyurethane or Rust-Oleum 9200 Rust-O-Thane.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
Product Details
9508
Data sheet
Manufacturer
Rust-Oleum
Water / Solvent Based
Solvent
For Use On
Concrete, Asphalt
Application Method
Trowel, Rake, Spiked Roller
Sheen
Semi-Gloss
Colour
Fully Tintable
VOC Levels
Ultra-Low (5-49 g/l)
Single, Two or Three Pack
Two-Pack
Pack Size
5L, 20L
Mixing Ratio
1 : 1 (Volume)
Dry to Handle (at 20°C)
24 hours
Dry to Recoat (at 20°C)
24 hours
Fully Cured (at 20°C)
7 Days
Coverage
2m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
10°C
Density
1,24
Solids by Volume
96 %
Heat Resistance (up-to)
100°C (dry heat)
VOC
31 g/l
Shelf Life (from date of manufacture)
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.
Rust-Oleum B95SL Flexible Self Levelling Epoxy is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
Rust-Oleum Mathys 108 Surfa Etch Solution is an easy to use, non-flammable and virtually odour free etching solution for the preparation of smooth concrete surfaces, masonry, galvanized steel and aluminum before applying a paint coating system.
Improves the adhesion of coating systems
Neutralizes alkaline salts
Also ideal to remove "white...
We no longer stock this product, but can recommend Jotun Hardtop XP as a great alternative.
Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option...
Rust-Oleum 5180 Epoxy Repair Mortar is an incredibly tough, 2 component epoxy resin mortar for repairing damaged, dished or dangerous concrete and stone floors.
For Professional use
Virtually indestructable
Heavy traffic friendly
Chemical resistant
Does not shrink or crack
Easy all-in-one packaging
Interior/Exterior use
No primer...
Rust-Oleum 5401 Epoxy Impregnation Primer is solvent free and improves adhesion on concrete and other porous, mineral surfaces.
For Professional use
Primarily intended for roller and brush application
Provides a good key for adhesion on porous, mineral substrates
Impregnation of porous and brittle floors
Can be applied on slightly damp...
We no longer stock this product, but can recommend Rust-Oleum 5110 Verti-Patch as a great alternative.
For further assistance please contact Rawlins Technical Team on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
We no longer stock this product, but depending upon actual project requirements, consider Rust-Oleum Speed Screed or Rust-Oleum 5400 Self Levelling Epoxy.
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish.
Each kit contains:
12" Roller,...