Rust-Oleum 8700 Mould Resistant Hygiene Acrylic Topcoat
  • Rust-Oleum 8700 Mould Resistant Hygiene Acrylic Topcoat

Rust-Oleum 8700 Hygienic Acrylic Topcoat

8792.5

We no longer stock this product, but can recommend Rust-Oleum 8300 Hygienic Topcoat as a great alternative.

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Quantity
Product not available
This Product has been Discontinued

Description

Rust-Oleum 8700 Hygienic Acrylic Topcoat is a water-based single pack hygienic topcoat which protects walls and ceilings against normal humidity and contamination indoors.

Features & Benefits

  • Offers better protection against contamination than non-hygienic paint
  • Very fast drying and recoating times (3 coats in a day)
  • Water-based paint
  • Can be applied on damp surfaces in combination with Rust-Oleum 8798 Hygienic Acrylic Primer
  • Durable gloss finish

Technical Data

  • Density: 1,2
  • Gloss Level: Gloss
  • Solids content in volume: 35 %
  • Heat Resistance: 80°C (dry heat)

Drying Times At 20°C/RH 50%

  • Touch dry: 30 minutes (20°C), 2 hours (10°C), 15 minutes (30°C)
  • Dry to handle: 2 hours (20°C), 6 hours (10°C), 2 hours (30°C)
  • Dry to recoat: 2 hours (20°C), 16 hours (10°C), 2 hours (30°C)
  • Fully cured: 3 days (20°C), 5 days (10°C), 2 days (30°C)

Theoretical Consumption

10 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. Remove contamination with FK111 or ND14. Wash total surface with plenty of fresh/warm water or high pressure (steam) cleaning in order to remove all remnants of contamination and cleaners. Prime or spot-prime with White Masonry Sealer 8798. Sand intact coatings to roughen the surface slightly. The surface must be clean and may be slightly damp during application.

Remarks

Maximum dry film thickness per coat: 80 µm dry, equals 225 µm wet. On very porous
substrates it is advisable to dilute the first coat up to 50% with water, followed by a second
coat.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.

Product Details
8792.5

Data sheet

For Use By
Professional Use
For Use By
Industrial Use
Interior / Exterior Use
Interior
Water / Solvent Based
Water
Water / Solvent Based
Water
Application Method
Brush, Roller, Spray
Sheen
Gloss
Colour
Standard / Ready Mixed
VOC Levels
Low (50-149 g/l)
Single, Two or Three Pack
Single
Single, Two or Three Pack
Single
Pack Size
5L
Application
Brush, Roller, Spray
Dry to Handle (at 20°C)
2 Hours
Dry to Recoat (at 20°C)
2 Hours
Fully Cured (at 20°C)
3 Days
Coverage
10m² per litre
Max. Application Temperature
35°C
Min. Application Temperature
5°C
Density
1,2
Solids by Volume
35 %
Heat Resistance (up-to)
80°C (dry heat)
VOC
87 g/l
Touch Dry
30 mins
Recommended Dry Film Thickness
35 µm
Recommended Wet Film Thickness
100 µm
UN Number
Not regulated
Usages
Walls & Ceilings
Product Type
Topcoat
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.


questions John adair  on 2018-05-08 11:47:14
Question: 

I'm repainting 500m² of cladding inside ameat processing factory its got a foodsafe laminate coating which has discoloured from smoke damage it's only 3months old factory I will do with airless spray its white an walls an ceiling I need to put on the best foodsafe coating u can supply help with your knowledge asap Greatly Appreciated Jregards John

Answer from Rawlins’ Technical Team: 

Rust-Oleum 8700 Hygienic Acrylic Topcoat is used regularly in such environments so in that respect may be considered “foodsafe”, although it has never been submitted for any test. By itself it could not be offered as blocking the fire damage stains. In which case we should consider using something like the Mathys Pegaprim Isofix first.


Question about the product

* Required fields
(read)
Send
You might also like

Rust-Oleum FK111 Cleaning Solution

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical...

In stock

Rust-Oleum 8798 Hygienic Acrylic Primer

We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum 8798 Hygienic Acrylic Primer is a water-based single pack hygienic primer which once overcoated with Rust-Oleum 8700 Hygienic Topcoat...

In stock

Rust-Oleum Mathys ND14 Cleaner Degreaser

Rust-Oleum Mathys Alkaline Cleaner/Degreaser ND14 should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Non-flammable, virtually odour-free cleaning/degreasing solution. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge,...

Price £74.82 (ex. VAT)
In Stock and Available for Delivery

General Painting Application Kit

General Painting Application Kit from Rawlins Paints provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects Click to jump down to...

Price £8.02 (ex. VAT)
In Stock and Available for Delivery