We no longer stock this product, but can recommend HMG Gloss Trim Paint as a great alternative.
Coo-Var Gloss is a top quality oil based coating with excellent opacity. Dries to a high gloss finish. Coo-Var Gloss is ideal for use on suitably primed metal, wood and GRP doors, frames, pipes, benches and trim. For interior and exterior use.
All surfaces should be clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.
Please contact Rawlins Paints' Technical Support Team on 0113 2455450 for more information.
It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.
- Interior / Exterior Use
- Interior and Exterior
- Water / Solvent Based
- For Use On
- Application Method
- Brush, Roller
- Standard / Ready Mixed
- Single, Two or Three Pack
- Pack Size
- 1L, 2.5L, 5L
- 14m² per litre
- Recommended Thinner/Cleaner
- Thinner 14
- Solids by Volume
- Touch Dry
- 6 Hours
- Recommended Dry Film Thickness
- 50-55 microns
- Recommended Wet Film Thickness
- 100 microns
Be the first to ask a question about this product!