Thermoguard Vandalguard Dark-Resisting Primer

Manufacturer:

We no longer stock this product, but can recommend Nu-Guard WB Concrete Sealer as a great alternative.

Bulk Buy
£0.00   tax incl.

Product Description

We no longer stock this product, but can recommend Nu-Guard WB Concrete Sealer as a great alternative.

Thermoguard Vandalguard Dark-Resisting Primer is a clear water based primer for use on porous substrates prior to application of Thermoguard Vandalguard.

Thermoguard Vandalguard Dark-Resisting Primer is used when application directly onto the subtrate with Thermoguard Vandalguard would result in the ‘wetting out’ or darkening of the surface. Use to prevent or minimise any change in the appearance of the coated surface. It can also be used to seal very porous substrates to improve the spread rate of the Thermoguard Vandalguard protective coating.

Thermoguard Vandalguard Dark-Resisting Primer can be applied onto a wide variety of porous surfaces (eg. Brick, mortar, concrete, render porous stone and bare timber). It is not suitable for sealed or previously painted surfaces.To test the effectiveness of the Thermoguard Vandalguard Dark-Resisting Primer we strongly recommend a small discrete trial application be carried out.

Clear water based primer for use on porous substrates prior to application of Graffiti Magic

A clear, water based primer sealer for use on porous substrates prior to the application of Graffiti Magic. This applies where application directly onto the subtrate would result in the ‘wetting out’ or darkening of the surface.
Use of Non‐Darkening Sealer helps to prevent or minimise any change in the appearance of the coated surface. It can also be used to seal very porous substrates to improve the spread rate of the Graffiti Magic protective coating.

Non‐Darkening sealer can be applied onto a wide variety of porous surfaces (eg. Brick, mortar, concrete, render porous stone and bare timber). It is not suitable for sealed or previously painted surfaces.
To test the effectiveness of the Non‐Darkening Sealer we strongly recommend a small discrete trial application be carried out.A clear, water based primer sealer for use on porous substrates prior to the application of Graffiti Magic. This applies where application directly onto the subtrate would result in the ‘wetting out’ or darkening of the surface.
Use of Non‐Darkening Sealer helps to prevent or minimise any change in the appearance of the coated surface. It can also be used to seal very porous substrates to improve the spread rate of the Graffiti Magic protective coating.

Non‐Darkening sealer can be applied onto a wide variety of porous surfaces (eg. Brick, mortar, concrete, render porous stone and bare timber). It is not suitable for sealed or previously painted surfaces.
To test the effectiveness of the Non‐Darkening Sealer we strongly recommend a small discrete trial application be carried out.

- See more at: http://www.rawlinspaints.com/products/Graffiti-Magic-%252d-Non%252dDarkening-Sealer.html#sthash.w9TTUIfh.dpuf

It is your responsibility to read the Product Data Sheets (available below) before you place an order and prior to application of the product. The content of this website is our best recommendation and is not advice. Coverage rates quoted are approximate, you agree that coverage depends on the condition of the substrate, surface absorption, texture and application method. We ALWAYS recommend a trial area is coated to ensure the product meets your requirements before use.

Technical Data

Typical Coverage (per coat)10m² per litre
Touch Dry2 hours
ApplicationBrush, Roller, Spray
The figures stated above are approximate. Please ensure you refer to all datasheets for full application information.

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions



Be the first to ask a question about this product!

Question about the product

* Required fields
Send

The question has been correctly sent

Free delivery

On orders over
£75.00 + VAT

Low trade prices

Our best trade prices on everything!

Technical Advice

Fast FREE Technical Advice for Products & Projects

Click & collect

Order and collect from
our Leeds based trade store.
silent-exothermic unable